Amana owners in Taylors usually want two things from a repair company: experience with the brand and quick access to parts. The Taylors list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Amana Washers Near Taylors
31 repair companies serve Taylors from within 30 miles. 1 of them are based in Taylors itself, and other nearby bases include Greenville (10), Spartanburg (5), and Greer (2). Appliance Medic is the nearest, roughly 0.7 miles from Taylors. None of the repair companies near Taylors name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.4 stars across 31 businesses.
Companies are shown by relevance and distance from Taylors. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Rated 4.5 stars or higher (10+ reviews) | 14 |
|---|---|
| Three nearest companies, miles away | 0.7, 4.7, 4.7 |
| Open on Saturdays (per listing) | 17 |
| Repair companies inside 30 miles | 31 |
| Name washers or washing machines in their listing | 8 |
| Mention Amana | 0 |
First up for Taylors: Mr. Appliance of Greater Greenville (6.7 miles away, based in Greenville, 4.8 stars from 1,221 reviews); The Olde Homestead, Inc. (7.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Appliance GrandMasters (9.8 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); DP Appliance Repair (19.2 miles away, based in Boiling Springs, 4.5 stars from 132 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines and Features
What Makes Amana Washer Repairs Different
The Amana Dual Action Agitator top loader is belt-driven by a 1/4 HP motor. Source: Whirlpool Corporation - Amana 3.5 cu. ft. Top-Load Washer with Dual Action Agitator (NTW4516FW)
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Amana Washer Symptoms and First Checks
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
Amana Washer Error Codes
| Code | What it means |
|---|---|
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
| OL | Top load: the load is too big, so the washer drains and some items need to come out. Source: Amana - Error Codes in Top Load HE Washers |
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Washer will not start or the lid or door stays locked
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Laundry Notes for Taylors, SC
Most washer calls in Taylors come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Before You Book in Taylors
- How often do you repair Amana washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Amana Washer Repair FAQs: Taylors, SC
Which Taylors technicians work on Amana?
Why does my Amana washer show an error code?
Is this Amana customer service?
Related Repair Pages for Taylors
Amana Washer Repair in Nearby Cities
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Taylors technician bring the right parts.