If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Taylors, with those that mention Frigidaire first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Frigidaire. If your washer is still under manufacturer coverage, contact Frigidaire directly.
Who Works on Frigidaire Washers Near Taylors
We found 31 appliance repair companies within 30 miles of Taylors. 1 list an address in Taylors, and the rest are spread across Greenville (10), Spartanburg (5), and Greer (2). Distances run up to about 29 miles. Appliance Medic is the nearest, roughly 0.7 miles from Taylors. None of the repair companies near Taylors name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 31 rated companies, the average public rating is 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 0.7, 4.7, 4.7 |
|---|---|
| Appliance repair companies in range (30 mi) | 31 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Mention washer work | 8 |
| Open on Saturdays (per listing) | 17 |
| Mention Frigidaire | 0 |
Closest matches for Taylors: The Olde Homestead, Inc. (7.1 miles away, based in Greenville, 4.9 stars from 1,104 reviews); Appliance GrandMasters (9.8 miles away, based in Greenville, 4.7 stars from 1,162 reviews, lists Saturday hours); Mr. Appliance of Greater Greenville (6.7 miles away, based in Greenville, 4.8 stars from 1,221 reviews); Sears Appliance Repair (8.9 miles away, based in Greenville, 4.4 stars from 72 reviews, lists Saturday hours).
Frigidaire sells top-load and laundry center washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Frigidaire Washer Lines Technicians Work On
How Frigidaire Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and the hose should not be sealed airtight into it. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Symptoms and First Checks
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
- Washer won't start. First confirm the washer is sitting level. Source: Frigidaire - What should I do if my washer does not start?
Frigidaire Washer Error Codes
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
When to Call for Frigidaire Washer Repair
- Burning smell or a motor that hums without turning
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Taylors Washer Call
Keeping a Frigidaire Washer Running
- Use new fill hoses with rubber washers, replace flood-safe hoses with standard washer hoses, and run both faucets before connecting to flush debris away from the valve screens. Source: Frigidaire - Laundry Water Supply Guide
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
Budgeting for a Frigidaire Washer Repair
Price the repair before replacing a Frigidaire washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Taylors
Most washer calls in Taylors come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
South Carolina does not issue a license specific to appliance repair; mechanical work such as plumbing, heating, air conditioning and refrigeration is licensed by the Contractor's Licensing Board for commercial-scale jobs and by the Residential Builders Commission for residential HVAC and plumbing. Source: S.C. Code Title 40, Chapter 11 (Contractors), South Carolina Legislature
In South Carolina, you can check a license with the SC LLR License Lookup or report a problem to the South Carolina Department of Consumer Affairs.
Questions to Ask a Taylors Washer Technician
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Frigidaire Washer Repair FAQs: Taylors, SC
Should I repair or replace my Frigidaire washer?
Where is the water under my washer coming from?
Why does my Frigidaire washer show an error code?
Why won't my washer spin?
Related Repair Pages for Taylors
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.