A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Kirtland list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Whirlpool Washer Repair Near Kirtland
40 repair companies serve Kirtland from within 30 miles. Other nearby bases include Cleveland (14), Mentor (3), and Eastlake (2). The farthest listed company is about 20 miles out. Nearest on the list: Sears Appliance Repair, around 4.1 miles out. None of the repair companies near Kirtland name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Rated companies nearby average 4.5 stars across 36 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 4.1, 4.8, 5.1 |
|---|---|
| Listing Saturday hours | 36 |
| Mention washer work | 13 |
| Repair companies inside 30 miles | 60 |
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 23 |
The leading options for Kirtland are G&L APPLIANCE REPAIR (8.3 miles away, based in Mentor, 5.0 stars from 97 reviews, lists Saturday hours); My Appliance Guy (6.7 miles away, based in Willowick, 4.9 stars from 340 reviews); Sears Appliance Repair (4.1 miles away, based in Mentor, 4.6 stars from 212 reviews, lists Saturday hours); MYRIAD Professional Services (8.5 miles away, based in Euclid, 5.0 stars from 14 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Local Notes for Kirtland
Most washer calls in Kirtland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Questions to Ask a Kirtland Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- How often do you repair Whirlpool washers, and how quickly can you get parts?
Whirlpool Washer Repair FAQs: Kirtland, OH
What should I do about a Whirlpool error code?
What stops a washer from spinning?
Why is my washer leaking?
Do you work for Whirlpool?
Related Repair Pages for Kirtland
Whirlpool Washer Repair Near Kirtland
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Kirtland technician bring the right parts.