Serving Kirtland, Ohio and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Kirtland, OH

A local list of washer repair companies near Kirtland, OH, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in Kirtland?
Tell us the brand and the problem and we will connect you with a technician near Kirtland.
☎(866) 293-4411
✓12 companies listed for Kirtland✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Kirtland and the Lake County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Kirtland, OH

Our data shows 40 appliance repair companies inside a 30-mile radius of Kirtland. Other nearby bases include Cleveland (14), Mentor (3), and Eastlake (2). The farthest listed company is about 20 miles out. The closest is Sears Appliance Repair, about 4.1 miles away. Of those, 6 mention washing machine or washer work by name. Rated companies nearby average 4.5 stars across 36 businesses.

Washer & Dryer Repair
Mr. Appliance of Cleveland
4734 Spring Rd, Brooklyn Heights, OH 44131
21.0 mi from Kirtland
★★★★½ 4.7 (1,919 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Mentor
1975 Hubbard Rd, Madison, OH 44057
21.6 mi from Kirtland
★★★★½ 4.7 (591 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7875 Johnnycake Ridge Rd, Mentor, OH 44060
4.1 mi from Kirtland
★★★★½ 4.6 (212 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
G&L APPLIANCE REPAIR
9213 Luoem Trail, Mentor, OH 44060
8.3 mi from Kirtland
★★★★★ 5.0 (97 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
My Appliance Guy
1419 E 328th St Unit B, Willowick, OH 44095
6.7 mi from Kirtland
★★★★★ 4.9 (340 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
621 Richmond Rd, Richmond Heights, OH 44143
8.8 mi from Kirtland
★★★★½ 4.7 (229 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Margus Appliance Repair
6520 Broadview Rd, Parma, OH 44134
23.0 mi from Kirtland
★★★★★ 4.9 (202 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6950 W 130th St, Middleburg Heights, OH 44130
27.7 mi from Kirtland
★★★★½ 4.7 (287 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
MYRIAD Professional Services
25701 N Lakeland Blvd Ste 312, Euclid, OH 44132
8.5 mi from Kirtland
★★★★★ 5.0 (14 reviews)
Mentions washersSaturday hours
Appliance Repair
Ace Washer & Appliance Services
10938 Crossings Dr, Aurora, OH 44202
17.6 mi from Kirtland
★★★★★ 4.9 (39 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
7701 Broadview Rd, Seven Hills, OH 44131
24.2 mi from Kirtland
★★★★½ 4.6 (271 reviews)
Mentions washersSaturday hours
Appliance Repair
Complete Appliance Service
4735 Richmond Rd, Cleveland, OH 44128
14.0 mi from Kirtland
★★★★½ 4.6 (1,720 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Kirtland, OH
Open on Saturdays (per listing)36
Mention a major washer brand0
Name washers or washing machines in their listing13
Three nearest companies, miles away4.1, 4.8, 5.1
Repair companies inside 30 miles60
Rated 4.5 stars or higher (10+ reviews)23

Closest matches for Kirtland: Mr. Appliance of Cleveland (21.0 miles away, based in Brooklyn Heights, 4.7 stars from 1,919 reviews, lists Saturday hours); Mr. Appliance of Mentor (21.6 miles away, based in Madison, 4.7 stars from 591 reviews, lists Saturday hours); Sears Appliance Repair (4.1 miles away, based in Mentor, 4.6 stars from 212 reviews, lists Saturday hours); G&L APPLIANCE REPAIR (8.3 miles away, based in Mentor, 5.0 stars from 97 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Burning smell or a motor that hums without turning
  • Water on the floor under or in front of the washer
  • Washer fills slowly, will not fill, or keeps filling
  • Water left in the drum after the cycle

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What Gets Fixed on a Kirtland Washer Call

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Water, Power and Safety First

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Kirtland

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Kirtland, OH

Most washer calls in Kirtland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form

In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.

Before You Book in Kirtland

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • What guarantee do you give on parts and labor?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Kirtland, OH

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Find Your Washer Brand in Kirtland

More Washing Machine Repair Pages Nearby

Before you call a Kirtland technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech