Whirlpool owners in Coram usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Coram, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near Coram
40 repair companies serve Coram from within 30 miles. 1 of them are based in Coram itself, and the rest are spread across Bohemia (5), Holbrook (4), and Holtsville (3). The farthest listed company is about 10 miles out. The closest is MJM Restaurant Appliance Repairs And Sales, about 1.3 miles away. No company within 90 miles of Coram mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.2 stars across 28 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 1.3, 2.0, 2.6 |
|---|---|
| Mention washer work | 5 |
| Appliance repair companies in range (30 mi) | 60 |
| With 4.5+ stars and at least 10 reviews | 17 |
| Mention Whirlpool | 0 |
| Open on Saturdays (per listing) | 41 |
First up for Coram: Sears Appliance Repair (9.3 miles away, based in Bohemia, 4.5 stars from 269 reviews, lists Saturday hours); LJ Appliance Repair Service (5.6 miles away, based in Ridge, 4.6 stars from 22 reviews, lists Saturday hours); EASTERN GRILLS LLC - BBQ Grill (3.1 miles away, based in Medford, 5.0 stars from 365 reviews, lists Saturday hours); Island Wide Appliance (8.2 miles away, based in Patchogue, 4.5 stars from 322 reviews).
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
What Whirlpool Says to Check First
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Water left in the drum after the cycle
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
What Gets Fixed on a Coram Washer Call
Keeping a Whirlpool Washer Running
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
What Coram Owners Should Know
Most washer calls in Coram come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card
In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.
Hiring a Washer Repair Company in Coram
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
Whirlpool Washer Repair FAQs: Coram, NY
Why does my front-load washer smell?
Do you work for Whirlpool?
What should I do about a Whirlpool error code?
Other Washer Repair in Coram
Whirlpool Washer Repair in Nearby Cities
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Coram technician bring the right parts.