Serving Coram, New York and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Coram, NY

Washing machine repair from independent technicians serving Coram, with ratings, distances and what to check before you call.

Need washer repair in Coram?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Coram✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washing Machine Repair Companies Near Coram

We found 40 appliance repair companies within 30 miles of Coram. 1 list an address in Coram, and other nearby bases include Bohemia (5), Holbrook (4), and Holtsville (3). Of those, 3 mention washing machine or washer work by name. Nearest on the list: MJM Restaurant Appliance Repairs And Sales, around 1.3 miles out. Rated companies nearby average 4.2 stars across 28 businesses.

Washer & Dryer Repair
Eddies Appliance Repair
90 Cain Dr, Brentwood, NY 11717
13.6 mi from Coram
★★★★★ 5.0 (1,413 reviews)
Mentions washersSaturday hours
Appliance Repair
Willie's Appliance
1785 Express Dr N, Hauppauge, NY 11788
12.7 mi from Coram
★★★★½ 4.6 (1,316 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
LJ Appliance Repair Service
100 Village Dr, Ridge, NY 11961
5.6 mi from Coram
★★★★½ 4.6 (22 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Island Wide Appliance
321 W Main St, Patchogue, NY 11772
8.2 mi from Coram
★★★★½ 4.5 (322 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
5151 Sunrise Hwy, Bohemia, NY 11716
9.3 mi from Coram
★★★★½ 4.5 (269 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
4000 Jericho Tpke, East Northport, NY 11731
16.4 mi from Coram
★★★★½ 4.6 (110 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
805 New York Ave, Huntington, NY 11743
21.6 mi from Coram
★★★★★ 4.9 (44 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
605 Old Country Rd, Riverhead, NY 11901
18.3 mi from Coram
★★★★½ 4.4 (62 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Wyandanch
1551 Straight Path, Wyandanch, NY 11798
20.6 mi from Coram
★★★★★ 5.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
EASTERN GRILLS LLC - BBQ Grill
3135b NY-112, Medford, NY 11763
3.1 mi from Coram
★★★★★ 5.0 (365 reviews)
Saturday hours
Washer & Dryer Repair
Islip Appliance Repair LLC
2311 Sunrise Hwy, Islip, NY 11751
14.5 mi from Coram
★★★★★ 5.0 (1 review)
Mentions washers
Appliance Repair
JIC Appliance Care LLC
1170 Lincoln Ave #8, Holbrook, NY 11741
8.2 mi from Coram
★★★★★ 5.0 (377 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Coram repair companies in numbers
Listing Saturday hours41
Rated 4.5 stars or higher (10+ reviews)17
Repair companies inside 30 miles60
Mention a major washer brand0
Mention washer work5
Three nearest companies, miles away1.3, 2.0, 2.6

First up for Coram: Eddies Appliance Repair (13.6 miles away, based in Brentwood, 5.0 stars from 1,413 reviews, lists Saturday hours); Willie's Appliance (12.7 miles away, based in Hauppauge, 4.6 stars from 1,316 reviews, lists Saturday hours); LJ Appliance Repair Service (5.6 miles away, based in Ridge, 4.6 stars from 22 reviews, lists Saturday hours); Island Wide Appliance (8.2 miles away, based in Patchogue, 4.5 stars from 322 reviews).

⚡ Get connected with a washer technician near Coram
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning
  • Washer will not spin, or clothes come out soaking wet

The Usual Washer Culprits in Coram

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

How a Washer Service Call Usually Goes in Coram

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.

Troubleshooting first? Start with washer not filling with water or washer smells like mildew.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Coram

Most washer calls in Coram come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

New York State has no appliance repair license; home improvement contractor licensing is set locally, required in New York City and in Nassau, Suffolk, Westchester, Putnam and Rockland counties. Source: NY Attorney General: Contractor tip card

In New York, you can report a problem to the New York State Office of the Attorney General, Bureau of Consumer Frauds and Protection.

Questions to Ask a Coram Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Will you check the drain pump filter and drain hose before replacing the pump?

Washing Machine Repair FAQs: Coram, NY

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Find Your Washer Brand in Coram

Washing Machine Repair Near Coram

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Coram technician a trip for parts.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech