A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Franklin, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Franklin
Our data shows 40 appliance repair companies inside a 30-mile radius of Franklin. Other nearby bases include Rockaway (3), Dover (3), and Wayne (3). The farthest listed company is about 25 miles out. None of the repair companies near Franklin name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Superior Appliance Repair is the nearest, roughly 5.2 miles from Franklin. Across 34 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 5.2, 7.6, 14.6 |
|---|---|
| Mention washer work | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 12 |
| Companies within 30 miles | 60 |
| Listing Saturday hours | 43 |
| Mention Whirlpool | 0 |
The leading options for Franklin are Dan Marc Appliance (23.6 miles away, based in West Caldwell, 4.5 stars from 6,455 reviews, lists Saturday hours); Superior Appliance Repair (5.2 miles away, based in Wantage, 4.9 stars from 51 reviews); Sears Appliance Repair (14.6 miles away, based in Rockaway, 4.7 stars from 334 reviews, lists Saturday hours); General George Appliance Repair (24.0 miles away, based in Goshen, 5.0 stars from 466 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Care Whirlpool Recommends for Its Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
Local Notes for Franklin
Most washer calls in Franklin come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Hiring a Washer Repair Company in Franklin
- What is the service call or diagnostic fee, and is it applied to the repair?
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Franklin, NJ
How do I get rid of a washer mildew smell?
How do I find a technician who knows Whirlpool washers?
Is my Whirlpool washer worth repairing?
Is this Whirlpool customer service?
More Washing Machine Repair in Franklin, NJ
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.