A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Kernersville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Whirlpool Washer Repair Near Kernersville
40 repair companies serve Kernersville from within 30 miles. 5 of them are based in Kernersville itself, and other nearby bases include High Point (11), Winston-Salem (9), and Greensboro (9). Distances run up to about 16 miles. No company within 90 miles of Kernersville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Works Kernersville, about 0.3 miles away. Rated companies nearby average 4.7 stars across 22 businesses.
Companies are shown by relevance and distance from Kernersville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 56 |
|---|---|
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 13 |
| Open on Saturdays (per listing) | 39 |
| Mention washer work | 4 |
| Distance to the three closest (mi) | 0.3, 0.4, 0.7 |
The leading options for Kernersville are John Michael & Associates, Inc. (9.0 miles away, based in High Point, 4.7 stars from 230 reviews); Sears Appliance Repair (14.1 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours); Convenient Appliance Service (13.1 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews); Convenient Appliance Service (12.9 miles away, based in Greensboro, 4.9 stars from 1,961 reviews).
Whirlpool Washer Lines and Features
How Whirlpool Washers Are Built
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Whirlpool Washer Symptoms and First Checks
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E2 | Dispenser system problem on select models, often a clogged detergent drawer or cartridge. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Care Whirlpool Recommends for Its Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
Local Notes for Kernersville
Most washer calls in Kernersville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Kernersville
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: Kernersville, NC
Why is my washer leaking?
How do I find a technician who knows Whirlpool washers?
What stops a washer from spinning?
Should I repair or replace my Whirlpool washer?
More Washing Machine Repair in Kernersville, NC
Whirlpool Washer Repair Near Kernersville
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.