Most Amana washer repairs in Kernersville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Kernersville, with those that mention Amana first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Kernersville NC
Our data shows 40 appliance repair companies inside a 30-mile radius of Kernersville. 5 list an address in Kernersville, and other nearby bases include High Point (11), Winston-Salem (9), and Greensboro (9). Distances run up to about 16 miles. No company within 90 miles of Kernersville mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Appliance Works Kernersville, about 0.3 miles away. The 22 rated companies in range average 4.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Amana | 0 |
|---|---|
| Name washers or washing machines in their listing | 4 |
| Rated 4.5 stars or higher (10+ reviews) | 13 |
| Companies within 30 miles | 56 |
| Three nearest companies, miles away | 0.3, 0.4, 0.7 |
| Open on Saturdays (per listing) | 39 |
Closest matches for Kernersville: John Michael & Associates, Inc. (9.0 miles away, based in High Point, 4.7 stars from 230 reviews); Convenient Appliance Service (13.1 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews); Convenient Appliance Service (12.9 miles away, based in Greensboro, 4.9 stars from 1,961 reviews); Sears Appliance Repair (14.1 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours).
Know Your Amana Washer
What a Amana Washer Technician Deals With
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Common Amana Washer Problems
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
| LdU | Top load: the lid can't unlock because something is sitting on top of the washer. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Keeping a Amana Washer Running
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
What Kernersville Owners Should Know
Most washer calls in Kernersville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Kernersville
- What is the service call or diagnostic fee, and is it applied to the repair?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
Amana Washer Repair FAQs: Kernersville, NC
How do I get rid of a washer mildew smell?
Is this Amana customer service?
Is my Amana washer worth repairing?
Where is the water under my washer coming from?
Related Repair Pages for Kernersville
More Amana Washer Repair Pages Nearby
Also Serving Towns Around Kernersville
Amana washer repair for Walkertown is handled by the same companies listed for Kernersville. Each town also has its own washing machine repair page with the nearest companies:
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.