Serving Kent, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Kent, WA

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Kent.

Water sitting in the washer in Kent?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Kent✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Kent and the King County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Kent, WA

Within 30 miles of Kent there are 40 appliance repair companies in our data. 13 of them are based in Kent itself, and other nearby bases include Auburn (10), Renton (9), and Tukwila (3). The farthest listed company is about 7 miles out. The closest is Kent Appliance Repair, about 0.6 miles away. 4 of them mention washing machine or washer work in their listing or website. The 31 rated companies in range average 4.7 stars.

Washer & Dryer Repair
HotWire Furnace, Air Conditioning & Appliance Repair Tacoma
5054 39th St NE, Tacoma, WA 98422
10.2 mi from Kent
★★★★★ 4.9 (470 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Expert Appliance Repair
5705 S 121st St, Seattle, WA 98178
7.7 mi from Kent
★★★★★ 5.0 (1,139 reviews)
Mentions washers
Washer & Dryer Repair
Roman’s Appliance Repair Pro
519 S Henderson St, Seattle, WA 98108
10.7 mi from Kent
★★★★★ 4.9 (117 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Fix Experts
5831 6th Ave S suite#101, Seattle, WA 98108
12.4 mi from Kent
★★★★★ 4.8 (48 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Complete Repair LLC
32325 Myrtle Ave SE, Black Diamond, WA 98010
9.7 mi from Kent
★★★★★ 4.9 (227 reviews)
Mentions washers
Washer & Dryer Repair
Tekniton Appliance Repair
19226 66th Ave S L-100, Kent, WA 98032
3.3 mi from Kent
★★★★ 3.9 (199 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Service Solutions LLC
33530 1st Way S, Federal Way, WA 98003
8.1 mi from Kent
★★★★★ 5.0 (14 reviews)
Mentions washers
Washer & Dryer Repair
Appliances Repair Solutions
30326 110th Pl SE, Auburn, WA 98092
4.1 mi from Kent
★★★★★ 4.9 (62 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
27116 167th Pl SE #108, Covington, WA 98042
4.9 mi from Kent
★★★★½ 4.4 (150 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A&H Appliance and Home services
1313 SW 348th St, Federal Way, WA 98023
9.4 mi from Kent
★★★★★ 4.9 (35 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Troubleshooters Appliance Repair
13398 Newcastle Commons Dr, Newcastle, WA 98059
11.0 mi from Kent
★★★★★ 4.9 (136 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
301 Southcenter Mall, Tukwila, WA 98188
5.3 mi from Kent
★★★★½ 4.3 (471 reviews)
Mentions washersSaturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Kent repair companies in numbers
Three nearest companies, miles away0.6, 0.9, 1.0
Name washers or washing machines in their listing9
Open on Saturdays (per listing)33
Mention a major washer brand0
Appliance repair companies in range (30 mi)60
With 4.5+ stars and at least 10 reviews21

The leading options for Kent are HotWire Furnace, Air Conditioning & Appliance Repair Tacoma (10.2 miles away, based in Tacoma, 4.9 stars from 470 reviews, lists Saturday hours); Expert Appliance Repair (7.7 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Roman’s Appliance Repair Pro (10.7 miles away, based in Seattle, 4.9 stars from 117 reviews, lists Saturday hours); Appliance Fix Experts (12.4 miles away, based in Seattle, 4.8 stars from 48 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Kent
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • Water on the floor under or in front of the washer
  • Washer will not start or the lid or door stays locked
  • An error code on the display

Why Washing Machines Break Down

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What a Washing Machine Technician Checks

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not filling with water.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Kent, WA

Most washer calls in Kent come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Before You Book in Kent

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Kent, WA

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Find Your Washer Brand in Kent

Washing Machine Repair in Nearby Cities

A clear drain filter, open supply valves and the model number in hand make any washer repair in Kent faster and cheaper.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech