If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Kent, with those that mention Amana first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Who Works on Amana Washers Near Kent
Within 30 miles of Kent there are 40 appliance repair companies in our data. 13 list an address in Kent, and the rest are spread across Auburn (10), Renton (9), and Tukwila (3). The farthest listed company is about 7 miles out. No company within 90 miles of Kent mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Kent Appliance Repair is the nearest, roughly 0.6 miles from Kent. Rated companies nearby average 4.7 stars across 31 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 9 |
|---|---|
| Distance to the three closest (mi) | 0.6, 0.9, 1.0 |
| Open on Saturdays (per listing) | 33 |
| Mention Amana | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
| Appliance repair companies in range (30 mi) | 60 |
The leading options for Kent are Appliances Repair Solutions (4.1 miles away, based in Auburn, 4.9 stars from 62 reviews, lists Saturday hours); Sears Appliance Repair (5.3 miles away, based in Tukwila, 4.3 stars from 471 reviews, lists Saturday hours); Sears Appliance Repair (4.9 miles away, based in Covington, 4.4 stars from 150 reviews, lists Saturday hours); Appliance Repairman LLC (3.1 miles away, 5.0 stars from 257 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
What a Amana Washer Technician Deals With
Amana front loaders with a user-cleanable pump filter are serviced from the front: a short drain hose is emptied into a container, then the filter is unscrewed counterclockwise, and the location varies by model. Source: Amana - Cleaning the Pump Filter - Front Load Washer
What Amana Says to Check First
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
What Amana Washer Codes Mean
| Code | What it means |
|---|---|
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
When to Call for Amana Washer Repair
- Musty or mildew smell from the drum or door seal
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Kent Washer Call
Keeping a Amana Washer Running
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
What Amana Washer Repairs Cost
Most Amana washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Kent
Most washer calls in Kent come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Kent Washer Technician
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Kent, WA
Where is the water under my washer coming from?
Is my Amana washer worth repairing?
Do you work for Amana?
How do I get rid of a washer mildew smell?
Other Washer Repair in Kent
Amana Washer Repair Near Kent
Write down any error code your Amana washer shows and at what point in the cycle it appears. It helps a Kent technician bring the right parts.