Serving SeaTac, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in SeaTac, WA

A local list of washer repair companies near SeaTac, WA, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in SeaTac?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for SeaTac✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of SeaTac, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving SeaTac, WA

40 repair companies serve SeaTac from within 30 miles. 2 list an address in SeaTac, and other nearby bases include Kent (12), Renton (11), and Seattle (7). Nearest on the list: Emergency Home Appliance Experts, around 0.9 miles out. 5 list washing machine or washer work specifically. Rated companies nearby average 4.7 stars across 30 businesses.

Washer & Dryer Repair
Expert Appliance Repair
5705 S 121st St, Seattle, WA 98178
3.9 mi from SeaTac
★★★★★ 5.0 (1,139 reviews)
Mentions washers
Washer & Dryer Repair
Washer and Dryer Repair Services
2601 76th Ave SE #553, Mercer Island, WA 98040
10.2 mi from SeaTac
★★★★★ 4.9 (257 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Roman’s Appliance Repair Pro
519 S Henderson St, Seattle, WA 98108
5.6 mi from SeaTac
★★★★★ 4.9 (117 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Fix Experts
5831 6th Ave S suite#101, Seattle, WA 98108
7.4 mi from SeaTac
★★★★★ 4.8 (48 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Pro Repairs
450 Alaskan Way S Ste 200, Seattle, WA 98104
10.8 mi from SeaTac
★★★★½ 4.6 (660 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Tekniton Appliance Repair
19226 66th Ave S L-100, Kent, WA 98032
2.5 mi from SeaTac
★★★★ 3.9 (199 reviews)
Mentions washers
Washer & Dryer Repair
Appliance Service Solutions LLC
33530 1st Way S, Federal Way, WA 98003
10.0 mi from SeaTac
★★★★★ 5.0 (14 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
301 Southcenter Mall, Tukwila, WA 98188
2.0 mi from SeaTac
★★★★½ 4.3 (471 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Troubleshooters Appliance Repair
13398 Newcastle Commons Dr, Newcastle, WA 98059
9.4 mi from SeaTac
★★★★★ 4.9 (136 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A&H Appliance and Home services
1313 SW 348th St, Federal Way, WA 98023
11.0 mi from SeaTac
★★★★★ 4.9 (35 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliances Repair Solutions
30326 110th Pl SE, Auburn, WA 98092
9.3 mi from SeaTac
★★★★★ 4.9 (62 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
27116 167th Pl SE #108, Covington, WA 98042
10.3 mi from SeaTac
★★★★½ 4.4 (150 reviews)
Mentions washersSaturday hours

Companies are shown by relevance and distance from SeaTac. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: SeaTac, WA
Rated 4.5 stars or higher (10+ reviews)20
Open on Saturdays (per listing)35
Distance to the three closest (mi)0.9, 1.1, 1.6
Name washers or washing machines in their listing10
Companies within 30 miles60
Mention a major washer brand0

The leading options for SeaTac are Expert Appliance Repair (3.9 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Washer and Dryer Repair Services (10.2 miles away, based in Mercer Island, 4.9 stars from 257 reviews, lists Saturday hours); Roman’s Appliance Repair Pro (5.6 miles away, based in Seattle, 4.9 stars from 117 reviews, lists Saturday hours); Appliance Fix Experts (7.4 miles away, based in Seattle, 4.8 stars from 48 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • Water on the floor under or in front of the washer
  • Washer will not spin, or clothes come out soaking wet
  • An error code on the display

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

Inside a Washer Repair Visit

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with washer smells like mildew or washer not spinning.

If Your Washer Is Leaking

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in SeaTac, price the repair. Here is what published cost guides report for common jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for SeaTac, WA

Most washer calls in SeaTac come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Before You Book in SeaTac

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: SeaTac, WA

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Brand-Specific Washer Repair, SeaTac

Washing Machine Repair Near SeaTac

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a SeaTac technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech