Serving Kingston, Tennessee and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Kingston, TN

A local list of washer repair companies near Kingston, TN, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in Kingston?
Tell us the brand and the problem and we will connect you with a technician near Kingston.
☎(866) 293-4411
✓12 companies listed for Kingston✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Kingston, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. Below are the companies within reach of Kingston, sorted by how closely they match washing machine work, then by distance and public ratings.

Who Repairs Washers Near Kingston

We found 20 appliance repair companies within 30 miles of Kingston. Other nearby bases include Knoxville (7), Harriman (3), and Lenoir City (3). The farthest listed company is about 30 miles out. 8 list washing machine or washer work specifically. Nearest on the list: Murray's Major Appliance Services, around 3.1 miles out. Across 20 rated companies, the average public rating is 4.5 stars.

Washer & Dryer Repair
Mr. Appliance of Knoxville
200 Prosperity Dr, Knoxville, TN 37923
23.7 mi from Kingston
★★★★½ 4.6 (1,973 reviews)
Mentions washers
Washer & Dryer Repair
Eleet Appliance Repair
124 Upper Jones Rd, Lenoir City, TN 37771
9.1 mi from Kingston
★★★★★ 4.8 (45 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
236 S Roane St, Harriman, TN 37748
5.2 mi from Kingston
★★★★½ 4.3 (113 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Pattersons Home Appliances
1807 Roane State Hwy, Harriman, TN 37748
3.1 mi from Kingston
★★★★½ 4.5 (121 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Pattersons Home Appliances
10640 Kingston Pike, Knoxville, TN 37922
20.2 mi from Kingston
★★★★ 4.2 (202 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
S&S Service LLC
1001 Alexis Ln, Lenoir City, TN 37772
14.7 mi from Kingston
★★★★★ 4.9 (95 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7600 Kingston Pike H, Knoxville, TN 37919
25.9 mi from Kingston
★★★★ 4.2 (260 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
198 Foothills Mall Dr, Maryville, TN 37801
29.4 mi from Kingston
★★★★½ 4.4 (106 reviews)
Mentions washersSaturday hours
Appliance Repair
Appliance Repair Service,Inc
2303 W Emory Rd #3708, Powell, TN 37849
28.0 mi from Kingston
★★★★★ 4.9 (494 reviews)
Appliance Repair
Pinpoint Appliance Repair
125 Randolph Rd, Oak Ridge, TN 37830
16.2 mi from Kingston
★★★★★ 4.8 (180 reviews)
Appliance Repair
A-Fair Appliance Center LLC
405 Highland Ave, Loudon, TN 37774
12.6 mi from Kingston
★★★★½ 4.5 (10 reviews)
Appliance Repair
Berny's Appliances
200 Prosperity Dr, Knoxville, TN 37923
23.7 mi from Kingston
★★★★★ 4.8 (195 reviews)
Saturday hours

Companies are shown by relevance and distance from Kingston. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Kingston repair companies in numbers
Distance to the three closest (mi)3.1, 3.1, 5.2
Appliance repair companies in range (30 mi)20
Name washers or washing machines in their listing8
With 4.5+ stars and at least 10 reviews10
Listing Saturday hours11
Mention a major washer brand0

Closest matches for Kingston: Mr. Appliance of Knoxville (23.7 miles away, based in Knoxville, 4.6 stars from 1,973 reviews); Eleet Appliance Repair (9.1 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours); Sears Appliance Repair (5.2 miles away, based in Harriman, 4.3 stars from 113 reviews, lists Saturday hours); Pattersons Home Appliances (3.1 miles away, based in Harriman, 4.5 stars from 121 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet
  • Burning smell or a motor that hums without turning
  • Musty or mildew smell from the drum or door seal

What Usually Goes Wrong

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Kingston

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with washer not filling with water or front-load vs top-load washer problems.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Kingston

Most washer calls in Kingston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors

In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).

How to Choose a Washing Machine Technician Near Kingston

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Kingston, TN

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
How much does washing machine repair cost in Kingston?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Brand-Specific Washer Repair, Kingston

Washing Machine Repair Near Kingston

Before you call a Kingston technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Kingston
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech