Serving Billings, Montana and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Billings, MT

See which appliance repair companies around Billings work on washing machines, how far away they are and how customers rate them.

Need washer repair in Billings?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓11 companies listed for Billings✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Billings and the Yellowstone County area, with companies that mention washer work shown first.

Washing Machine Repair Companies Near Billings

We found 11 appliance repair companies within 60 miles of Billings. 11 list an address in Billings. 3 list washing machine or washer work specifically. Nearest on the list: Sears Appliance Repair, around 0.3 miles out. Rated companies nearby average 4.2 stars across 11 businesses. Because the nearest shops are farther out, ask each company whether Billings is inside its regular service area.

Appliance Repair
Fred's Appliance
2649 King Ave W, Billings, MT 59102
2.6 mi from Billings
★★★★½ 4.4 (739 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Big Sky Appliance Repair
1015 Arlington Ave SW, Billings, MT 59101
3.0 mi from Billings
★★★★★ 4.9 (105 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1515 Grand Ave, Billings, MT 59102
0.3 mi from Billings
★ 1.0 (3 reviews)
Mentions washersSaturday hours
Appliance Repair
Waynes appliance repair corp
1425 St Johns Ave, Billings, MT 59102
1.2 mi from Billings
★★★★★ 5.0 (55 reviews)
Appliance Repair
Revive Appliance Repair
3969 Kings Green Dr, Billings, MT 59101
3.1 mi from Billings
★★★★★ 5.0 (75 reviews)
Appliance Repair
Radio Equipment Co
1205 Monad Rd, Billings, MT 59101
1.9 mi from Billings
★★★★½ 4.4 (19 reviews)
Appliance Repair
Brink Inc. Hobart Sales & Service
216 Moore Ln, Billings, MT 59101
1.7 mi from Billings
★★★★ 4.2 (13 reviews)
Appliance Repair
Good Stuff Appliance Repair
1008 Broadwater Ave, Billings, MT 59102
1.0 mi from Billings
★★★★ 3.9 (29 reviews)
Appliance Repair
Appliance Repair Billings MT
520 Wicks Ln Unit 10, Billings, MT 59105
4.6 mi from Billings
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Appliance Repair Services
744 N Moon Valley Rd, Billings, MT 59105
2.6 mi from Billings
★★★½ 3.7 (3 reviews)
Saturday hours
Appliance Repair
Billings Appliance Repair Tech
3109 First Ave N, Billings, MT 59101
2.1 mi from Billings
★★★★★ 5.0 (1 review)

Companies are shown by relevance and distance from Billings. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Billings
With 4.5+ stars and at least 10 reviews3
Mention a major washer brand0
Mention washer work3
Appliance repair companies in range (60 mi)11
Three nearest companies, miles away0.3, 1.0, 1.2
Listing Saturday hours4

Closest matches for Billings: Fred's Appliance (2.6 miles away, 4.4 stars from 739 reviews, lists Saturday hours); Big Sky Appliance Repair (3.0 miles away, 4.9 stars from 105 reviews); Sears Appliance Repair (0.3 miles away, 1.0 stars from 3 reviews, lists Saturday hours); Waynes appliance repair corp (1.2 miles away, 5.0 stars from 55 reviews).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Loud banging, shaking or walking during the spin
  • Grinding or roaring noise that rises with spin speed
  • Washer will not spin, or clothes come out soaking wet

What Usually Goes Wrong

Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What a Washing Machine Technician Checks

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Billings Owners Should Know

Most washer calls in Billings come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Before You Book in Billings

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Billings, MT

Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Find Your Washer Brand in Billings

More Washing Machine Repair Pages Nearby

Before you call a Billings technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech