Serving Livingston, Montana and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Livingston, MT

Washing machine repair from independent technicians serving Livingston, with ratings, distances and what to check before you call.

Washer down in Livingston?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓7 companies listed for Livingston✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Livingston, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. This page lists independent appliance repair companies serving Livingston and the Park County area, with companies that mention washer work shown first.

Washer Technicians Serving Livingston, MT

Within 60 miles of Livingston there are 7 appliance repair companies in our data. The rest are spread across Bozeman (5) and Belgrade (2). Distances run up to about 31 miles. 3 list washing machine or washer work specifically. The closest is Fred's Appliance, about 24.6 miles away. Across 7 rated companies, the average public rating is 4.0 stars. Because the nearest shops are farther out, ask each company whether Livingston is inside its regular service area.

Appliance Repair
Fred's Appliance
1934 N 19th Ave, Bozeman, MT 59718
24.6 mi from Livingston
★★★★½ 4.5 (655 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2825 W Main St, Bozeman, MT 59718
25.3 mi from Livingston
★ 1.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
Jonny's Appliance Sales & Service
133 Prospect Loop, Bozeman, MT 59718
30.7 mi from Livingston
★★★½ 3.4 (117 reviews)
Mentions washersCommercial
Appliance Repair
Lake Appliance Repair
510 S 23rd Ave, Bozeman, MT 59718
24.8 mi from Livingston
★★★★½ 4.7 (517 reviews)
Saturday hours
Appliance Repair
Stone's Maytag Service
246 Briar Place #6, Belgrade, MT 59714
29.2 mi from Livingston
★★★★½ 4.7 (17 reviews)
Mentions Maytag
Appliance Repair
Nelson Appliance Repair
7300 Springhill Rd, Belgrade, MT 59714
26.9 mi from Livingston
★★★★★ 5.0 (1 review)
Appliance Repair
Helland Appliance Repair
10 S Yellowstone Ave, Bozeman, MT 59718
25.8 mi from Livingston
★★★★★ 5.0 (1 review)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Livingston
Appliance repair companies in range (60 mi)7
Name washers or washing machines in their listing3
Three nearest companies, miles away24.6, 24.8, 25.3
Mention a major washer brand1
With 4.5+ stars and at least 10 reviews3
Open on Saturdays (per listing)4

Closest matches for Livingston: Fred's Appliance (24.6 miles away, based in Bozeman, 4.5 stars from 655 reviews, lists Saturday hours); Sears Appliance Repair (25.3 miles away, based in Bozeman, 1.0 stars from 1 reviews, lists Saturday hours); Jonny's Appliance Sales & Service (30.7 miles away, based in Bozeman, 3.4 stars from 117 reviews); Lake Appliance Repair (24.8 miles away, based in Bozeman, 4.7 stars from 517 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Water left in the drum after the cycle
  • Washer will not start or the lid or door stays locked
  • Washer will not spin, or clothes come out soaking wet
  • Grinding or roaring noise that rises with spin speed

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

What a Washing Machine Technician Checks

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with washer not draining or washer not spinning.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Livingston

Before replacing a washer in Livingston, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Livingston, MT

Most washer calls in Livingston come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Questions to Ask a Livingston Washer Technician

  • What guarantee do you give on parts and labor?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Livingston, MT

What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Brand-Specific Washer Repair, Livingston

Washing Machine Repair in Nearby Cities

Before you call a Livingston technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech