Serving Andover, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Andover, MN

Washing machine repair from independent technicians serving Andover, with ratings, distances and what to check before you call.

Need washer repair in Andover?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Andover✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Andover, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. Below are the companies within reach of Andover, sorted by how closely they match washing machine work, then by distance and public ratings.

Who Repairs Washers Near Andover

40 repair companies serve Andover from within 30 miles. Other nearby bases include Blaine (5), Plymouth (4), and Ham Lake (3). Nearest on the list: Local Appliance Service Experts, around 4.4 miles out. Of those, 5 mention washing machine or washer work by name. Rated companies nearby average 4.6 stars across 21 businesses.

Washer & Dryer Repair
Omega Force Appliance Repair
21897 S Diamond Lake Rd #400, Rogers, MN 55374
12.0 mi from Andover
★★★★★ 4.9 (1,637 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Minnesota Appliance Repair
6448 Main St Suite 12, North Branch, MN 55056
24.4 mi from Andover
★★★★★ 5.0 (170 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
24139 Greenway Rd, Forest Lake, MN 55025
17.4 mi from Andover
★★★★½ 4.6 (201 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Shortie's Appliances
6922 55th St N, Oakdale, MN 55128
23.6 mi from Andover
★★★★½ 4.7 (178 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Omega Force Appliance Repair
393 N Dunlap St Unit 400K, St Paul, MN 55104
22.7 mi from Andover
★★★★★ 4.9 (678 reviews)
Mentions washersSaturday hours
Appliance Repair
Omega Force Appliance Repair
7934 University Ave NE, Fridley, MN 55432
10.4 mi from Andover
★★★★½ 4.7 (105 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Solutions
16345 MN-65, Ham Lake, MN 55304
4.6 mi from Andover
★★★★½ 4.4 (440 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
12431 Wayzata Blvd, Minnetonka, MN 55305
20.7 mi from Andover
★★★★½ 4.4 (217 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AMA Appliance Service
101 Shady Oak Rd, Hopkins, MN 55343
23.6 mi from Andover
★★★★★ 5.0 (82 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
3001 White Bear Ave, Maplewood, MN 55109
21.5 mi from Andover
★★★★½ 4.5 (235 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Inc.
633 E Main St, Anoka, MN 55303
4.8 mi from Andover
★★★★ 3.9 (199 reviews)
Mentions washers
Appliance Repair
Anderson's Mechanical Services LLC
10611 Baltimore St NE #100, Blaine, MN 55449
8.0 mi from Andover
★★★★★ 4.8 (1,207 reviews)
Saturday hours

Companies are shown by relevance and distance from Andover. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Andover, MN
Mention a major washer brand0
Listing Saturday hours49
Mention washer work9
Repair companies inside 30 miles60
Rated 4.5 stars or higher (10+ reviews)18
Distance to the three closest (mi)4.4, 4.6, 4.8

The leading options for Andover are Omega Force Appliance Repair (12.0 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Minnesota Appliance Repair (24.4 miles away, based in North Branch, 5.0 stars from 170 reviews, lists Saturday hours); Sears Appliance Repair (17.4 miles away, based in Forest Lake, 4.6 stars from 201 reviews, lists Saturday hours); Shortie's Appliances (23.6 miles away, based in Oakdale, 4.7 stars from 178 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Andover
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water on the floor under or in front of the washer
  • Washer fills slowly, will not fill, or keeps filling
  • Washer will not spin, or clothes come out soaking wet
  • Musty or mildew smell from the drum or door seal

The Usual Washer Culprits in Andover

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Andover

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer not draining or washer smells like mildew.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Andover

Before replacing a washer in Andover, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Andover Owners Should Know

Most washer calls in Andover come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Questions to Ask a Andover Washer Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Andover, MN

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Washer Repair by Brand in Andover

More Washing Machine Repair Pages Nearby

Before you call a Andover technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech