Serving Ramsey, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Ramsey, MN

A local list of washer repair companies near Ramsey, MN, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the washer in Ramsey?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Ramsey✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Ramsey

Within 30 miles of Ramsey there are 40 appliance repair companies in our data. Other nearby bases include Blaine (5), Minneapolis (5), and Plymouth (4). Distances run up to about 21 miles. 5 list washing machine or washer work specifically. Nearest on the list: Maple Appliance Repair Anoka, around 4.2 miles out. Rated companies nearby average 4.5 stars across 21 businesses.

Washer & Dryer Repair
Omega Force Appliance Repair
21897 S Diamond Lake Rd #400, Rogers, MN 55374
6.9 mi from Ramsey
★★★★★ 4.9 (1,637 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Omega Force Appliance Repair
393 N Dunlap St Unit 400K, St Paul, MN 55104
25.9 mi from Ramsey
★★★★★ 4.9 (678 reviews)
Mentions washersSaturday hours
Appliance Repair
Omega Force Appliance Repair
7934 University Ave NE, Fridley, MN 55432
13.7 mi from Ramsey
★★★★½ 4.7 (105 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
24139 Greenway Rd, Forest Lake, MN 55025
23.3 mi from Ramsey
★★★★½ 4.6 (201 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Home Appliance Service
199 3rd St W, Maple Lake, MN 55358
27.4 mi from Ramsey
★★★★★ 5.0 (230 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
12431 Wayzata Blvd, Minnetonka, MN 55305
20.4 mi from Ramsey
★★★★½ 4.4 (217 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Solutions
16345 MN-65, Ham Lake, MN 55304
10.5 mi from Ramsey
★★★★½ 4.4 (440 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AMA Appliance Service
101 Shady Oak Rd, Hopkins, MN 55343
23.4 mi from Ramsey
★★★★★ 5.0 (82 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
8301 Flying Cloud Dr, Eden Prairie, MN 55344
28.3 mi from Ramsey
★★★★½ 4.5 (124 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Inc.
633 E Main St, Anoka, MN 55303
5.5 mi from Ramsey
★★★★ 3.9 (199 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
3001 White Bear Ave, Maplewood, MN 55109
26.2 mi from Ramsey
★★★★½ 4.5 (235 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
10 W Lake St, Minneapolis, MN 55408
23.1 mi from Ramsey
★★★★ 4.2 (144 reviews)
Mentions washersSaturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Ramsey, MN
Listing Saturday hours46
Mention a major washer brand0
Mention washer work8
Repair companies inside 30 miles60
Three nearest companies, miles away4.2, 5.5, 6.4
With 4.5+ stars and at least 10 reviews19

Closest matches for Ramsey: Omega Force Appliance Repair (6.9 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Omega Force Appliance Repair (25.9 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Omega Force Appliance Repair (13.7 miles away, based in Fridley, 4.7 stars from 105 reviews, lists Saturday hours); Sears Appliance Repair (23.3 miles away, based in Forest Lake, 4.6 stars from 201 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Ramsey
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water left in the drum after the cycle
  • Grinding or roaring noise that rises with spin speed
  • Water on the floor under or in front of the washer
  • An error code on the display

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What a Washing Machine Technician Checks

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.

Troubleshooting first? Start with washer smells like mildew or washer not spinning.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Ramsey

Most washer calls in Ramsey come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Questions to Ask a Ramsey Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • Can you give a written estimate before ordering parts?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Ramsey, MN

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Brand-Specific Washer Repair, Ramsey

Washing Machine Repair in Nearby Cities

Before you call a Ramsey technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech