If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Andover, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Andover
Our data shows 40 appliance repair companies inside a 30-mile radius of Andover. Other nearby bases include Blaine (5), Plymouth (4), and Ham Lake (3). The farthest listed company is about 18 miles out. None of the repair companies near Andover name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Local Appliance Service Experts, around 4.4 miles out. The 21 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Andover. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 18 |
| Mention washer work | 9 |
| Three nearest companies, miles away | 4.4, 4.6, 4.8 |
| Listing Saturday hours | 49 |
| Repair companies inside 30 miles | 60 |
The leading options for Andover are Omega Force Appliance Repair (12.0 miles away, based in Rogers, 4.9 stars from 1,637 reviews, lists Saturday hours); Appliance Solutions (4.6 miles away, based in Ham Lake, 4.4 stars from 440 reviews, lists Saturday hours); Appliance Repair Inc. (4.8 miles away, based in Anoka, 3.9 stars from 199 reviews); Omega Force Appliance Repair (10.4 miles away, based in Fridley, 4.7 stars from 105 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
- Water on the floor under or in front of the washer
Inside a Washer Repair Visit
Owner Care for Maytag Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Andover, MN
Most washer calls in Andover come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
How to Choose a Washing Machine Technician Near Andover
- What is the service call or diagnostic fee, and is it applied to the repair?
- Is your company licensed where my state requires it, and insured?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Andover, MN
How do I find a technician who knows Maytag washers?
Why is my washer leaking?
What stops a washer from spinning?
What should I do about a Maytag error code?
More Washing Machine Repair in Andover, MN
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.