Maytag owners in Spokane usually want two things from a repair company: experience with the brand and quick access to parts. The Spokane list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Spokane
We found 32 appliance repair companies within 30 miles of Spokane. 18 of them are based in Spokane itself, and other nearby bases include Spokane Valley (8), Post Falls (2), and Liberty Lake (1). 1 lists Maytag specifically. Nearest on the list: HotWire HVAC, Refrigerator & Appliance Repair Spokane, around 0.7 miles out. Rated companies nearby average 4.6 stars across 28 businesses.
Companies are shown by relevance and distance from Spokane. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 30 miles | 32 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 19 |
| Mention Maytag | 1 |
| Open on Saturdays (per listing) | 23 |
| Three nearest companies, miles away | 0.7, 1.0, 1.8 |
| Mention washer work | 13 |
The leading options for Spokane are Genuine Maytag Repair (7.4 miles away, 4.0 stars from 5 reviews, lists Saturday hours); IV Appliance Clinic (5.6 miles away, 5.0 stars from 747 reviews, lists Saturday hours); Allway Service Appliance repair & Refrigeration repair (12.5 miles away, based in Spokane Valley, 4.9 stars from 495 reviews, lists Saturday hours); HotWire HVAC, Refrigerator & Appliance Repair Spokane (0.7 miles away, 4.9 stars from 774 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
How Maytag Washers Are Built
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
What Gets Fixed on a Spokane Washer Call
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Laundry Notes for Spokane, WA
Most washer calls in Spokane come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a Spokane Washer Technician
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Spokane, WA
Why is my washer leaking?
Is my Maytag washer worth repairing?
Do you work for Maytag?
How do I find a technician who knows Maytag washers?
More Washing Machine Repair in Spokane, WA
Maytag Washer Repair Near Spokane
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.