Maytag owners in Silverdale usually want two things from a repair company: experience with the brand and quick access to parts. The Silverdale list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Silverdale
Within 30 miles of Silverdale there are 40 appliance repair companies in our data. 5 list an address in Silverdale, and the rest are spread across Seattle (15), Bremerton (9), and Bainbridge Island (7). The farthest listed company is about 17 miles out. None of the repair companies near Silverdale name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Noble Appliance Expert is the nearest, roughly 0.4 miles from Silverdale. Rated companies nearby average 4.4 stars across 27 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 49 |
|---|---|
| Name washers or washing machines in their listing | 9 |
| Repair companies inside 30 miles | 60 |
| Distance to the three closest (mi) | 0.4, 1.3, 1.4 |
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 14 |
First up for Silverdale: Sears Appliance Repair (16.4 miles away, based in Shoreline, 4.7 stars from 351 reviews, lists Saturday hours); Puget Sound Appliance Tech (16.7 miles away, based in Seattle, 4.9 stars from 57 reviews, lists Saturday hours); Appliance Fixers (14.3 miles away, based in Seattle, 5.0 stars from 68 reviews, lists Saturday hours); Super Appliance Repair (14.8 miles away, based in Seattle, 4.9 stars from 150 reviews).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Silverdale
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Silverdale
Most washer calls in Silverdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Silverdale
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Silverdale, WA
Is this Maytag customer service?
Why is my washer leaking?
Why does my front-load washer smell?
How do I find a technician who knows Maytag washers?
Other Washer Repair in Silverdale
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.