Maytag owners in Kenmore usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Kenmore, with those that mention Maytag first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.
Maytag Washer Repair Near Kenmore
Our data shows 40 appliance repair companies inside a 30-mile radius of Kenmore. 3 list an address in Kenmore, and other nearby bases include Kirkland (11), Bothell (7), and Seattle (5). Northfield Appliance Repair Systems is the nearest, roughly 0.5 miles from Kenmore. No company within 90 miles of Kenmore mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 32 rated companies in range average 4.8 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Repair companies inside 30 miles | 60 |
|---|---|
| Mention Maytag | 0 |
| Three nearest companies, miles away | 0.5, 0.7, 1.0 |
| Listing Saturday hours | 42 |
| Name washers or washing machines in their listing | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 21 |
First up for Kenmore: HotWire Furnace, Air Conditioning & Appliance Repair Bothell (3.2 miles away, based in Bothell, 4.9 stars from 1,493 reviews, lists Saturday hours); GR Solution Appliance Repair (3.7 miles away, based in Bothell, 4.9 stars from 53 reviews, lists Saturday hours); Sears Appliance Repair (4.7 miles away, based in Shoreline, 4.7 stars from 351 reviews, lists Saturday hours); 1 Man Appliance Service and Repair (3.3 miles away, based in Shoreline, 4.8 stars from 34 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Maytag Washer Symptoms and First Checks
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a Maytag Washer Running
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
What Kenmore Owners Should Know
Most washer calls in Kenmore come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Kenmore
- How often do you repair Maytag washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Kenmore, WA
How do I find a technician who knows Maytag washers?
Why does my Maytag washer show an error code?
How do I get rid of a washer mildew smell?
Other Washer Repair in Kenmore
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.