Maytag owners in Winooski usually want two things from a repair company: experience with the brand and quick access to parts. The Winooski list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Winooski
Our data shows 12 appliance repair companies inside a 30-mile radius of Winooski. Other nearby bases include Plattsburgh (3), St Albans City (2), and Essex Junction (1). Dan Reed and Daughter's Major Appliance Repair is the nearest, roughly 3.2 miles from Winooski. No company within 90 miles of Winooski mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.6 stars across 11 businesses.
Companies are shown by relevance and distance from Winooski. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 6 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 6 |
| Appliance repair companies in range (30 mi) | 12 |
| Listing Saturday hours | 6 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 3.2, 4.7, 6.7 |
First up for Winooski: Advanced Appliance (6.7 miles away, based in Colchester, 4.9 stars from 359 reviews); Marcotte Appliance (8.3 miles away, based in Shelburne, 4.7 stars from 18 reviews, lists Saturday hours); Third Generation Appliance Repair (23.9 miles away, based in New Haven, 4.7 stars from 13 reviews); Sears Appliance Repair (24.2 miles away, based in St Albans City, 4.4 stars from 110 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Select Maytag washers use commercial-grade technology that includes a stainless steel wash basket and a direct drive motor. Source: Maytag - Washers
Maytag Washer Symptoms and First Checks
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- Loud banging, shaking or walking during the spin
What Gets Fixed on a Winooski Washer Call
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Winooski
Most washer calls in Winooski come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
No separate Vermont appliance repair license was identified, but anyone who installs, inspects or services natural gas or propane systems, including appliances, must hold a gas certification from the Division of Fire Safety. Source: Vermont Division of Fire Safety: Natural and LP Gas Certifications
In Vermont, you can check a license with the DFS Licensing MasterList (Vermont Open Data: licensed electricians, plumbers and gas certifications) or report a problem to the Vermont Attorney General's Office, Consumer Assistance Program.
Before You Book in Winooski
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
Maytag Washer Repair FAQs: Winooski, VT
What should I do about a Maytag error code?
Is this Maytag customer service?
Which Winooski technicians work on Maytag?
Why won't my washer spin?
More Washing Machine Repair in Winooski, VT
Maytag Washer Repair Near Winooski
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.