Maytag owners in Stansbury Park usually want two things from a repair company: experience with the brand and quick access to parts. The Stansbury Park list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Stansbury Park
40 repair companies serve Stansbury Park from within 30 miles. Other nearby bases include West Jordan (13), West Valley City (6), and South Jordan (5). Nearest on the list: Mr. Appliance of Tooele, around 6.4 miles out. No company within 90 miles of Stansbury Park mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 23 rated companies, the average public rating is 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 10 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 14 |
| Three nearest companies, miles away | 6.4, 7.3, 11.6 |
| Repair companies inside 30 miles | 60 |
| Mention Maytag | 0 |
| Open on Saturdays (per listing) | 41 |
First up for Stansbury Park: Mr. Appliance of Tooele (6.4 miles away, based in Tooele, 4.8 stars from 352 reviews, lists Saturday hours); Quality Appliance Service (19.1 miles away, based in West Valley City, 4.6 stars from 1,441 reviews); Sears Appliance Repair (7.3 miles away, based in Tooele, 4.0 stars from 12 reviews, lists Saturday hours); Eagle Appliance Repair (19.5 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- An error code on the display
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Stansbury Park Washer Call
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- How old the washer is
Laundry Notes for Stansbury Park, UT
Most washer calls in Stansbury Park come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
How to Choose a Washing Machine Technician Near Stansbury Park
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Stansbury Park, UT
How do I get rid of a washer mildew smell?
Which Stansbury Park technicians work on Maytag?
Is my Maytag washer worth repairing?
Why does my Maytag washer show an error code?
Related Repair Pages for Stansbury Park
Maytag Washer Repair Near Stansbury Park
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.