If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Bluffdale list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, Bluffdale UT
Our data shows 40 appliance repair companies inside a 30-mile radius of Bluffdale. Other nearby bases include Riverton (7), Sandy (7), and South Jordan (6). None of the repair companies near Bluffdale name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Essential Appliance Service Solutions, around 1.8 miles out. The 21 rated companies in range average 4.8 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 41 |
|---|---|
| Mention washer work | 6 |
| Mention Maytag | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 1.8, 1.9, 2.8 |
| With 4.5+ stars and at least 10 reviews | 8 |
At the top of the Bluffdale list: Appliance Man (8.1 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Eagle Appliance Repair (8.4 miles away, based in West Jordan, 4.9 stars from 204 reviews, lists Saturday hours); Vertex Appliance Repair (5.0 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Aaron's Home Appliance Repair (4.6 miles away, based in South Jordan, 4.6 stars from 266 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Know Your Maytag Washer
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Bluffdale
Owner Care for Maytag Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Bluffdale
Most washer calls in Bluffdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Bluffdale Washer Technician
- Can you give a written estimate before ordering parts?
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Bluffdale, UT
Is my Maytag washer worth repairing?
Do you work for Maytag?
What should I do about a Maytag error code?
Why does my front-load washer smell?
Other Washer Repair in Bluffdale
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.