A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Mount Pleasant list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Mount Pleasant TX
Within 60 miles of Mount Pleasant there are 20 appliance repair companies in our data. The rest are spread across Longview (5), Texarkana (4), and Sulphur Springs (2). Distances run up to about 57 miles. None of the repair companies near Mount Pleasant name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: EL Appliance, around 0.6 miles out. The 18 rated companies in range average 4.2 stars. Mount Pleasant is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 8 |
|---|---|
| Open on Saturdays (per listing) | 8 |
| Distance to the three closest (mi) | 0.6, 32.7, 35.9 |
| Mention Maytag | 0 |
| Repair companies inside 60 miles | 20 |
| Mention washer work | 4 |
Closest matches for Mount Pleasant: Mr. Appliance of Texarkana (56.2 miles away, based in Texarkana, 4.9 stars from 717 reviews); Mayo Appliance Services (36.3 miles away, based in Sulphur Springs, 5.0 stars from 579 reviews); Sears Appliance Repair (44.8 miles away, based in Longview, 4.5 stars from 206 reviews, lists Saturday hours); Sears Appliance Repair (55.3 miles away, based in Texarkana, 4.7 stars from 94 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Says to Check First
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
When to Call for Maytag Washer Repair
- An error code on the display
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Mount Pleasant Washer Call
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Mount Pleasant Owners Should Know
Most washer calls in Mount Pleasant come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Mount Pleasant
- If the washer is leaking, will you find where the water starts before quoting a part?
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
Maytag Washer Repair FAQs: Mount Pleasant, TX
Is my Maytag washer worth repairing?
Why does my front-load washer smell?
Why won't my washer spin?
Related Repair Pages for Mount Pleasant
Maytag Washer Repair in Nearby Cities
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Mount Pleasant technician bring the right parts.