A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Mount Pleasant, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Mount Pleasant
Within 60 miles of Mount Pleasant there are 20 appliance repair companies in our data. Other nearby bases include Longview (5), Texarkana (4), and Sulphur Springs (2). None of the repair companies near Mount Pleasant name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: EL Appliance, around 0.6 miles out. Across 18 rated companies, the average public rating is 4.2 stars. Mount Pleasant is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 8 |
|---|---|
| Open on Saturdays (per listing) | 8 |
| Mention washer work | 4 |
| Companies within 60 miles | 20 |
| Mention Electrolux | 0 |
| Three nearest companies, miles away | 0.6, 32.7, 35.9 |
Closest matches for Mount Pleasant: Mr. Appliance of Texarkana (56.2 miles away, based in Texarkana, 4.9 stars from 717 reviews); Sears Appliance Repair (44.8 miles away, based in Longview, 4.5 stars from 206 reviews, lists Saturday hours); Sears Appliance Repair (55.3 miles away, based in Texarkana, 4.7 stars from 94 reviews, lists Saturday hours); EL Appliance (0.6 miles away, based in Mt Pleasant, 2.5 stars from 11 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- Burning smell or a motor that hums without turning
- An error code on the display
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Mount Pleasant
Most washer calls in Mount Pleasant come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Mount Pleasant
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
Electrolux Washer Repair FAQs: Mount Pleasant, TX
Why does my Electrolux washer show an error code?
Is this Electrolux customer service?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
Related Repair Pages for Mount Pleasant
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.