If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Highlands, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Highlands
Our data shows 40 appliance repair companies inside a 30-mile radius of Highlands. Other nearby bases include Pasadena (15), Baytown (7), and Houston (6). The farthest listed company is about 14 miles out. None of the companies within 30 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Operation: Save Appliance is the nearest, roughly 4.1 miles from Highlands. The 33 rated companies in range average 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 21 |
|---|---|
| Listing Saturday hours | 41 |
| Mention washer work | 15 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 4.1, 4.4, 4.4 |
| Repair companies inside 30 miles | 60 |
Closest matches for Highlands: AAA Maytag Home Appliance (30.9 miles away, based in Houston, 4.4 stars from 13 reviews, lists Saturday hours); Superior Appliances Repair (11.7 miles away, based in Pasadena, 4.9 stars from 81 reviews, lists Saturday hours); Cannon Appliance Repair (7.1 miles away, based in Baytown, 5.0 stars from 50 reviews, lists Saturday hours); Sears Appliance Repair (11.8 miles away, based in Pasadena, 4.5 stars from 271 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Highlands Washer Call
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Highlands Owners Should Know
Most washer calls in Highlands come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Highlands
- What guarantee do you give on parts and labor?
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Highlands, TX
Why is my washer leaking?
How do I find a technician who knows Maytag washers?
Why does my front-load washer smell?
Do you work for Maytag?
Related Repair Pages for Highlands
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Highlands technician bring the right parts.