Maytag owners in Colorado City usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Colorado City
Within 63 miles of Colorado City there are 6 appliance repair companies in our data. Other nearby bases include Sweetwater (2), Abilene (2), and Big Spring (1). The farthest listed company is about 63 miles out. Wes-Tex Appliance Services is the nearest, roughly 26.8 miles from Colorado City. No company within 90 miles of Colorado City mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.8 stars across 6 businesses. Colorado City is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Colorado City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 26.8, 27.1, 36.0 |
|---|---|
| Mention washer work | 3 |
| With 4.5+ stars and at least 10 reviews | 3 |
| Open on Saturdays (per listing) | 3 |
| Mention Maytag | 0 |
| Repair companies inside 63 miles | 6 |
First up for Colorado City: Sears Appliance Repair (27.1 miles away, based in Sweetwater, 4.4 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (36.0 miles away, based in Big Spring, 4.6 stars from 11 reviews, lists Saturday hours); Wes-Tex Appliance Services (26.8 miles away, based in Sweetwater, 4.9 stars from 9 reviews); Abilene Appliance Repairs (62.9 miles away, based in Abilene, 4.9 stars from 22 reviews).
Know Your Maytag Washer
What Makes Maytag Washer Repairs Different
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Common Maytag Washer Problems
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Maytag Washer Problems Worth a Service Call
- Washer will not start or the lid or door stays locked
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Colorado City
Most washer calls in Colorado City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Colorado City
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Maytag Washer Repair FAQs: Colorado City, TX
Should I repair or replace my Maytag washer?
Where is the water under my washer coming from?
Why does my front-load washer smell?
More Washing Machine Repair in Colorado City, TX
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.