Serving Colorado City, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Colorado City, TX

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Colorado City.

Water sitting in the washer in Colorado City?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓6 companies listed for Colorado City✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Colorado City, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. This page lists independent appliance repair companies serving Colorado City and the Mitchell County area, with companies that mention washer work shown first.

Washing Machine Repair Companies Near Colorado City

6 repair companies serve Colorado City from within 63 miles. The rest are spread across Sweetwater (2), Abilene (2), and Big Spring (1). 3 of them mention washing machine or washer work in their listing or website. Wes-Tex Appliance Services is the nearest, roughly 26.8 miles from Colorado City. Across 6 rated companies, the average public rating is 4.8 stars. Colorado City is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
604 E Broadway Ave, Sweetwater, TX 79556
27.1 mi from Colorado City
★★★★½ 4.4 (25 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1801 FM700 c6, Big Spring, TX 79720
36.0 mi from Colorado City
★★★★½ 4.6 (11 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Abilene Appliance Repairs
15 Greenthread St, Abilene, TX 79606
62.9 mi from Colorado City
★★★★★ 4.9 (22 reviews)
Mentions washers
Appliance Repair
Wes-Tex Appliance Services
102 Mockingbird Dr, Sweetwater, TX 79556
26.8 mi from Colorado City
★★★★★ 4.9 (9 reviews)
Appliance Repair
Appliance Doctor
4918 Potomac Ave, Abilene, TX 79605
62.6 mi from Colorado City
★★★★★ 5.0 (12 reviews)
Saturday hours
Appliance Repair
Yes Appliance Plus
1018 N West St, Winters, TX 79567
59.8 mi from Colorado City
★★★★★ 5.0 (2 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Colorado City
With 4.5+ stars and at least 10 reviews3
Mention washer work3
Companies within 63 miles6
Listing Saturday hours3
Mention a major washer brand0
Three nearest companies, miles away26.8, 27.1, 36.0

First up for Colorado City: Sears Appliance Repair (27.1 miles away, based in Sweetwater, 4.4 stars from 25 reviews, lists Saturday hours); Sears Appliance Repair (36.0 miles away, based in Big Spring, 4.6 stars from 11 reviews, lists Saturday hours); Abilene Appliance Repairs (62.9 miles away, based in Abilene, 4.9 stars from 22 reviews); Wes-Tex Appliance Services (26.8 miles away, based in Sweetwater, 4.9 stars from 9 reviews).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed
  • Washer will not start or the lid or door stays locked
  • An error code on the display

The Usual Washer Culprits in Colorado City

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

Inside a Washer Repair Visit

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Colorado City

Most washer calls in Colorado City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

Questions to Ask a Colorado City Washer Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Colorado City, TX

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
How much does washing machine repair cost in Colorado City?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Find Your Washer Brand in Colorado City

Washing Machine Repair Near Colorado City

A clear drain filter, open supply valves and the model number in hand make any washer repair in Colorado City faster and cheaper.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech