Maytag owners in Columbia usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Columbia, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Columbia
Our data shows 19 appliance repair companies inside a 30-mile radius of Columbia. 2 of them are based in Columbia itself, and the rest are spread across Franklin (5), Spring Hill (3), and Culleoka (1). Distances run up to about 30 miles. None of the repair companies near Columbia name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Brumley's Appliances, around 1.5 miles out. The 18 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Columbia. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 7 |
|---|---|
| Repair companies inside 30 miles | 19 |
| Mention Maytag | 0 |
| Distance to the three closest (mi) | 1.5, 1.7, 11.0 |
| With 4.5+ stars and at least 10 reviews | 7 |
| Listing Saturday hours | 10 |
The leading options for Columbia are New Life Appliance (12.8 miles away, based in Spring Hill, 4.9 stars from 106 reviews); All Better Appliance LLC (29.1 miles away, based in Burns, 4.8 stars from 95 reviews); Sears Appliance Repair (29.5 miles away, based in Lawrenceburg, 4.6 stars from 34 reviews, lists Saturday hours); Spring Hill Appliance Repair (11.0 miles away, based in Spring Hill, 1.9 stars from 26 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Maytag Washer Symptoms and First Checks
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Grinding or roaring noise that rises with spin speed
- An error code on the display
What Gets Fixed on a Columbia Washer Call
Care Maytag Recommends for Its Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle with a washer cleaning tablet about once a month, or when the clean washer light comes on or odor appears; without that cycle, use the hottest, highest water setting. Source: Maytag Product Help - Cleaning Washers with affresh
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Local Notes for Columbia
Most washer calls in Columbia come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Questions to Ask a Columbia Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Maytag Washer Repair FAQs: Columbia, TN
How do I get rid of a washer mildew smell?
Where is the water under my washer coming from?
Is my Maytag washer worth repairing?
Which Columbia technicians work on Maytag?
Other Washer Repair in Columbia
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.