If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Cedar Hills list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Independent Maytag Washer Technicians, Cedar Hills OR
Our data shows 40 appliance repair companies inside a 30-mile radius of Cedar Hills. The rest are spread across Portland (18), Beaverton (11), and Tigard (6). The farthest listed company is about 7 miles out. The closest is Beaverton Appliance Repair, about 0.7 miles away. None of the repair companies near Cedar Hills name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 29 rated companies in range average 4.8 stars.
Companies are shown by relevance and distance from Cedar Hills. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Appliance repair companies in range (30 mi) | 60 |
|---|---|
| Name washers or washing machines in their listing | 9 |
| Three nearest companies, miles away | 0.7, 0.9, 1.0 |
| Listing Saturday hours | 39 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Mention Maytag | 0 |
At the top of the Cedar Hills list: A&P Appliance Parts and Service (1.2 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Mr. Appliance of Portland (6.0 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours); Fix All Appliance Repair (6.5 miles away, based in Portland, 4.8 stars from 46 reviews); Hydra Appliance Repair (1.1 miles away, based in Portland, 4.7 stars from 231 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
How Maytag Washers Are Built
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Washer leaking. Maytag points first to loose inlet hose connections or missing hose washers, then to the drain hose and a backed-up household drain, and to clothes added mid-cycle that raise the water over the tub. Source: Maytag Product Help - Leaking Water Underneath - Washer
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
Signs Your Maytag Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer will not start or the lid or door stays locked
- Musty or mildew smell from the drum or door seal
How a Washer Service Call Usually Goes in Cedar Hills
Owner Care for Maytag Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- How old the washer is
What Cedar Hills Owners Should Know
Most washer calls in Cedar Hills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Hiring a Washer Repair Company in Cedar Hills
- How often do you repair Maytag washers, and how quickly can you get parts?
- Can you give a written estimate before ordering parts?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Cedar Hills, OR
How do I get rid of a washer mildew smell?
Do you work for Maytag?
Should I repair or replace my Maytag washer?
More Washing Machine Repair in Cedar Hills, OR
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.