A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Bethany
Within 30 miles of Bethany there are 40 appliance repair companies in our data. Other nearby bases include Portland (20), Beaverton (11), and Hillsboro (6). Nearest on the list: Appliance Service & Care Experts, around 2.0 miles out. No company within 90 miles of Bethany mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.8 stars across 30 businesses.
Companies are shown by relevance and distance from Bethany. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Repair companies inside 30 miles | 60 |
|---|---|
| Mention Maytag | 0 |
| Three nearest companies, miles away | 2.0, 2.1, 3.3 |
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Open on Saturdays (per listing) | 42 |
| Mention washer work | 9 |
At the top of the Bethany list: A&P Appliance Parts and Service (5.3 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Fix All Appliance Repair (9.2 miles away, based in Portland, 4.8 stars from 46 reviews); Hydra Appliance Repair (4.6 miles away, based in Portland, 4.7 stars from 231 reviews, lists Saturday hours); Mr. Appliance of Portland (9.0 miles away, based in Portland, 5.0 stars from 18 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
The washer will only run and spin when the lid or door switch senses it is fully closed, and the lid or door locks at the start of a cycle. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
Common Maytag Washer Problems
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Washer will not spin, or clothes come out soaking wet
What a Washing Machine Technician Checks
Keeping a Maytag Washer Running
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
Price the repair before replacing a Maytag washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Around Bethany
Most washer calls in Bethany come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Hiring a Washer Repair Company in Bethany
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Bethany, OR
Why does my front-load washer smell?
Should I repair or replace my Maytag washer?
Which Bethany technicians work on Maytag?
Is this Maytag customer service?
More Washing Machine Repair in Bethany, OR
More Maytag Washer Repair Pages Nearby
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.