Maytag owners in Mexico usually want two things from a repair company: experience with the brand and quick access to parts. The Mexico list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Maytag. If your washer is still under manufacturer coverage, contact Maytag directly.
Who Works on Maytag Washers Near Mexico
Our data shows 32 appliance repair companies inside a 60-mile radius of Mexico. 1 of them are based in Mexico itself, and other nearby bases include Columbia (7), Jefferson City (6), and Warrenton (4). Distances run up to about 60 miles. No company within 90 miles of Mexico mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Sears Appliance Repair is the nearest, roughly 1.5 miles from Mexico. The 31 rated companies in range average 4.4 stars. Mexico is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Mexico. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Listing Saturday hours | 20 |
| Name washers or washing machines in their listing | 7 |
| Three nearest companies, miles away | 1.5, 22.1, 23.5 |
| Repair companies inside 60 miles | 32 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
First up for Mexico: Sears Appliance Repair (1.5 miles away, 4.3 stars from 34 reviews, lists Saturday hours); Sears Appliance Repair (30.2 miles away, based in Columbia, 4.6 stars from 75 reviews, lists Saturday hours); Sears Appliance Repair (23.5 miles away, based in Fulton, 4.5 stars from 38 reviews, lists Saturday hours); Williams HVAC & Appliance repair service (25.9 miles away, based in Columbia, 5.0 stars from 1 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Mexico Washer Call
Owner Care for Maytag Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Maytag Washer Repair Cost Ranges
A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Mexico, MO
Most washer calls in Mexico come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Questions to Ask a Mexico Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Maytag Washer Repair FAQs: Mexico, MO
Why won't my washer spin?
Is this Maytag customer service?
Why does my front-load washer smell?
Should I repair or replace my Maytag washer?
More Washing Machine Repair in Mexico, MO
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.