If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Hannibal list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Hannibal
Our data shows 11 appliance repair companies inside a 60-mile radius of Hannibal. 1 of them are based in Hannibal itself, and the rest are spread across Moberly (2), Quincy (1), and Louisiana (1). The farthest listed company is about 59 miles out. No company within 90 miles of Hannibal mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Swiftcare Appliance Repair Masters is the nearest, roughly 0.3 miles from Hannibal. The 10 rated companies in range average 4.4 stars. Because the nearest shops are farther out, ask each company whether Hannibal is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.3, 15.7, 25.7 |
|---|---|
| Mention washer work | 2 |
| Appliance repair companies in range (60 mi) | 11 |
| Mention Maytag | 0 |
| With 4.5+ stars and at least 10 reviews | 1 |
| Open on Saturdays (per listing) | 6 |
First up for Hannibal: Sears Appliance Repair (15.7 miles away, based in Quincy, 4.0 stars from 83 reviews, lists Saturday hours); Sears Appliance Repair (47.1 miles away, based in Mexico, 4.3 stars from 34 reviews, lists Saturday hours); Swiftcare Appliance Repair Masters (0.3 miles away, 5.0 stars from 3 reviews, lists Saturday hours); Optima Appliance Repair Services (25.7 miles away, based in Louisiana, 5.0 stars from 2 reviews).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines Technicians Work On
What Makes Maytag Washer Repairs Different
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E2 | Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code |
Signs Your Maytag Washer Needs a Technician
- An error code on the display
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
What Gets Fixed on a Hannibal Washer Call
Keeping a Maytag Washer Running
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Maytag Washer Call
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
What Hannibal Owners Should Know
Most washer calls in Hannibal come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Washer Repair Company in Hannibal
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Hannibal, MO
Should I repair or replace my Maytag washer?
How do I find a technician who knows Maytag washers?
Why does my Maytag washer show an error code?
Where is the water under my washer coming from?
Related Repair Pages for Hannibal
More Maytag Washer Repair Pages Nearby
Write down any error code your Maytag washer shows and at what point in the cycle it appears. It helps a Hannibal technician bring the right parts.