Most Maytag washer repairs in Mission involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. Below are independent repair companies serving Mission, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Mission KS
Within 30 miles of Mission there are 40 appliance repair companies in our data. Other nearby bases include Kansas City (17), Overland Park (9), and Independence (6). The farthest listed company is about 15 miles out. None of the repair companies near Mission name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Mr. Fix It & Appliance Sales is the nearest, roughly 2.5 miles from Mission. The 36 rated companies in range average 4.6 stars.
Companies are shown by relevance and distance from Mission. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Name washers or washing machines in their listing | 5 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Listing Saturday hours | 32 |
| Distance to the three closest (mi) | 2.5, 3.4, 4.5 |
| Companies within 30 miles | 53 |
Closest matches for Mission: Appliance Shark (3.4 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours); Tager Appliance Repair (12.1 miles away, based in Olathe, 4.9 stars from 249 reviews, lists Saturday hours); Sears Appliance Repair (13.3 miles away, based in Independence, 4.5 stars from 909 reviews, lists Saturday hours); Arrowhead Appliance Repair (15.0 miles away, based in Independence, 4.8 stars from 234 reviews, lists Saturday hours).
Know which Maytag washer you have before you call. Maytag makes top-load agitator, top-load impeller, and front-load models, and the technician will ask.
Maytag Washer Lines Technicians Work On
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
What Maytag Washer Codes Mean
| Code | What it means |
|---|---|
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
When to Call for Maytag Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Mission Washer Call
Care Maytag Recommends for Its Washers
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Mission
Most washer calls in Mission come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
How to Choose a Washing Machine Technician Near Mission
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Can you give a written estimate before ordering parts?
Maytag Washer Repair FAQs: Mission, KS
How do I find a technician who knows Maytag washers?
Why does my Maytag washer show an error code?
Should I repair or replace my Maytag washer?
Why is my washer leaking?
Related Repair Pages for Mission
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.