If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Independent Maytag Washer Technicians, Urbandale IA
Within 30 miles of Urbandale there are 27 appliance repair companies in our data. 5 of them are based in Urbandale itself, and other nearby bases include Des Moines (11), West Des Moines (2), and Ankeny (2). The closest is Harper Appliance Repair Solutions, about 0.6 miles away. None of the repair companies near Urbandale name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 26 rated companies in range average 4.4 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 0.6, 1.3, 1.5 |
|---|---|
| Name washers or washing machines in their listing | 6 |
| Mention Maytag | 0 |
| Listing Saturday hours | 21 |
| Companies within 30 miles | 27 |
| With 4.5+ stars and at least 10 reviews | 4 |
The leading options for Urbandale are Westside Appliance Repair (2.0 miles away, 4.6 stars from 774 reviews); Greens Appliance, Heating & Cooling (1.5 miles away, based in Grimes, 4.9 stars from 4,448 reviews, lists Saturday hours); Hometown Hero Appliance Repair (1.3 miles away, 4.9 stars from 889 reviews); Sears Appliance Repair (11.2 miles away, based in Des Moines, 4.4 stars from 117 reviews, lists Saturday hours).
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5E3 | Top load: lid lock problem; Maytag suggests a five-minute power reset first. Source: Maytag Product Help - F5E3 - Error Code |
When to Call for Maytag Washer Repair
- Water left in the drum after the cycle
- Water on the floor under or in front of the washer
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Urbandale
Keeping a Maytag Washer Running
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
What Maytag Washer Repairs Cost
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Laundry Notes for Urbandale, IA
Most washer calls in Urbandale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors
In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.
Hiring a Washer Repair Company in Urbandale
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- How often do you repair Maytag washers, and how quickly can you get parts?
Maytag Washer Repair FAQs: Urbandale, IA
How do I get rid of a washer mildew smell?
What should I do about a Maytag error code?
Why is my washer leaking?
Why won't my washer spin?
Related Repair Pages for Urbandale
Maytag Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.