If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Hemet list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Maytag Washer Repair Near Hemet
Our data shows 40 appliance repair companies inside a 30-mile radius of Hemet. 4 of them are based in Hemet itself, and the rest are spread across Murrieta (11), Menifee (6), and Perris (5). Distances run up to about 18 miles. Nearest on the list: Sears Appliance Repair, around 1.1 miles out. None of the repair companies near Hemet name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 35 rated companies, the average public rating is 4.3 stars.
Companies are shown by relevance and distance from Hemet. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention washer work | 24 |
|---|---|
| Distance to the three closest (mi) | 1.1, 1.4, 1.7 |
| Open on Saturdays (per listing) | 49 |
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Companies within 30 miles | 60 |
| Mention Maytag | 0 |
First up for Hemet: Sears Appliance Repair (1.1 miles away, 4.7 stars from 290 reviews, lists Saturday hours); Urgent Repair Appliances & HVAC (12.3 miles away, based in Murrieta, 4.8 stars from 35 reviews, lists Saturday hours); Sears Appliance Repair (14.5 miles away, based in Banning, 4.8 stars from 176 reviews, lists Saturday hours); Sears Appliance Repair (16.9 miles away, based in Temecula, 4.8 stars from 520 reviews, lists Saturday hours).
Know Your Maytag Washer
What a Maytag Washer Technician Deals With
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
Common Maytag Washer Problems
- Off balance, shaking or walking. Maytag says to spread the load evenly, confirm the shipping bolts were removed, and level the washer so all four feet sit firmly on the floor. Source: Maytag Product Help - Washer is Vibrating, Walking or Moving
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
Maytag Washer Error Codes
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- An error code on the display
What a Washing Machine Technician Checks
Owner Care for Maytag Washers
- If fill is slow, shut off the water, remove the inlet hoses and scrub clogged inlet screens on the back of the water valve with a brush and mild soap. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
What Hemet Owners Should Know
Most washer calls in Hemet come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Before You Book in Hemet
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Hemet, CA
Where is the water under my washer coming from?
Which Hemet technicians work on Maytag?
How do I get rid of a washer mildew smell?
Other Washer Repair in Hemet
Maytag Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Maytag washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.