Electrolux owners in Hemet usually want two things from a repair company: experience with the brand and quick access to parts. The Hemet list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Electrolux Washer Repair Near Hemet
We found 40 appliance repair companies within 30 miles of Hemet. 4 of them are based in Hemet itself, and the rest are spread across Murrieta (11), Menifee (6), and Perris (5). The farthest listed company is about 18 miles out. Nearest on the list: Sears Appliance Repair, around 1.1 miles out. No company within 90 miles of Hemet mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 35 rated companies in range average 4.3 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Electrolux | 0 |
|---|---|
| Listing Saturday hours | 49 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Distance to the three closest (mi) | 1.1, 1.4, 1.7 |
| Repair companies inside 30 miles | 60 |
| Name washers or washing machines in their listing | 24 |
Closest matches for Hemet: Sears Appliance Repair (16.9 miles away, based in Temecula, 4.8 stars from 520 reviews, lists Saturday hours); Sears Appliance Repair (1.1 miles away, 4.7 stars from 290 reviews, lists Saturday hours); TNE Service (17.6 miles away, based in Temecula, 4.9 stars from 205 reviews, lists Saturday hours); Sears Appliance Repair (14.5 miles away, based in Banning, 4.8 stars from 176 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
What Electrolux Says to Check First
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
When to Call for Electrolux Washer Repair
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Washer fills slowly, will not fill, or keeps filling
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Electrolux Washer Repair Cost Ranges
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Laundry Notes for Hemet, CA
Most washer calls in Hemet come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
California requires businesses that repair major home appliances such as refrigerators, ranges, dishwashers, washers and dryers for pay to register with the Bureau of Household Goods and Services as Major Home Appliance Service Dealers, including out-of-state providers serving California customers. Source: Application for Registration (Electronic and Appliance Repair Dealers) - Bureau of Household Goods and Services
In California, you can check a license with the CSLB Check a License or report a problem to the California Attorney General, Public Inquiry Unit (consumer complaint against a business).
Before You Book in Hemet
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Hemet, CA
How do I get rid of a washer mildew smell?
What stops a washer from spinning?
Is my Electrolux washer worth repairing?
More Washing Machine Repair in Hemet, CA
Electrolux Washer Repair in Nearby Cities
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Hemet technician bring the right parts.