If your Maytag washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Jacksonville, with those that mention Maytag first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Jacksonville
Within 60 miles of Jacksonville there are 40 appliance repair companies in our data. 1 list an address in Jacksonville, and the rest are spread across Rome (8), Anniston (4), and Fort Payne (4). The farthest listed company is about 51 miles out. Nearest on the list: Quality Appliance Solutions, around 2.2 miles out. None of the repair companies near Jacksonville name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The 37 rated companies in range average 4.0 stars. Because the nearest shops are farther out, ask each company whether Jacksonville is inside its regular service area.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 33 |
|---|---|
| Mention washer work | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
| Three nearest companies, miles away | 2.2, 10.3, 11.3 |
| Mention Maytag | 0 |
| Repair companies inside 60 miles | 60 |
The leading options for Jacksonville are Coopers Appliance (18.0 miles away, based in Eastaboga, 5.0 stars from 13 reviews, lists Saturday hours); Sears Appliance Repair (19.4 miles away, based in Gadsden, 4.4 stars from 76 reviews, lists Saturday hours); Scott's appliance repair LLC (12.1 miles away, based in Anniston, 4.6 stars from 201 reviews, lists Saturday hours); Sears Appliance Repair (34.0 miles away, based in Pell City, 4.6 stars from 507 reviews, lists Saturday hours).
Maytag Washer Lines Technicians Work On
How Maytag Washers Are Built
Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer
What Maytag Says to Check First
- Washer odor. Maytag links odor to skipped cleanings, wet loads left sitting and too much detergent or softener, and recommends regular washer cleaning and moving loads out promptly. Source: Maytag - How to repair a washing machine (top load)
- Washer not filling. Maytag says to make sure both faucets are fully open, the inlet hoses are not kinked, and the inlet screens on the water valve are not clogged. Source: Maytag Product Help - Checking the Fill Hoses if the Washer is not Filling
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F5E1 | Top load: lid switch problem; the lid may not be fully closed or something is blocking the switch. Source: Maytag Product Help - F5E1 - Error Code |
Signs Your Maytag Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Washer fills slowly, will not fill, or keeps filling
- Washer will not start or the lid or door stays locked
How a Washer Service Call Usually Goes in Jacksonville
Care Maytag Recommends for Its Washers
- On front loaders, wipe and dry the door seal folds, remove wet loads promptly and leave the door slightly open after use to limit mildew and odor. Source: Maytag Product Help - Cleaning a Front Load Washer Door Seal
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
Laundry Notes for Jacksonville, AL
Most washer calls in Jacksonville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Alabama does not issue a separate appliance repair license, and the state's heating, air conditioning and refrigeration contractor law expressly excludes work on household appliances, residential refrigerators and ice machines. Source: Code of Alabama 1975, Section 34-31-18 et seq. (Alabama Board of Heating, Air Conditioning & Refrigeration Contractors)
In Alabama, you can check a license with the Alabama Plumbers and Gas Fitters Examining Board Individual Licensee Search or report a problem to the Alabama Attorney General's Office, Consumer Interest Division.
Questions to Ask a Jacksonville Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Maytag washers, and how quickly can you get parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Maytag Washer Repair FAQs: Jacksonville, AL
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
Is my Maytag washer worth repairing?
Related Repair Pages for Jacksonville
Maytag Washer Repair Near Jacksonville
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.