If your Kenmore washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Mapleton, with those that mention Kenmore first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Kenmore. If your washer is still under manufacturer coverage, contact Kenmore directly.
If you bought your Kenmore at Sears, you do not need to go back to Sears for a repair. Independent technicians near Mapleton work on Kenmore washers regularly.
Independent Kenmore Washer Technicians, Mapleton UT
We found 40 appliance repair companies within 30 miles of Mapleton. 1 of them are based in Mapleton itself, and the rest are spread across Orem (9), Provo (7), and American Fork (5). Distances run up to about 25 miles. No company within 90 miles of Mapleton mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Golden Appliance Repair Mapleton is the nearest, roughly 1.9 miles from Mapleton. Rated companies nearby average 4.4 stars across 29 businesses.
Companies are shown by relevance and distance from Mapleton. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Kenmore | 0 |
|---|---|
| Three nearest companies, miles away | 1.9, 2.6, 2.6 |
| With 4.5+ stars and at least 10 reviews | 11 |
| Mention washer work | 4 |
| Open on Saturdays (per listing) | 37 |
| Companies within 30 miles | 53 |
At the top of the Mapleton list: Brothers Masters (13.8 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Sears Appliance Repair (3.5 miles away, based in Spanish Fork, 4.3 stars from 52 reviews, lists Saturday hours); McCoy Fridge Repair (2.6 miles away, based in Spanish Fork, 4.9 stars from 209 reviews, lists Saturday hours); Smart Appliance Service (3.6 miles away, based in Springville, 4.8 stars from 123 reviews).
Kenmore sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Kenmore Washer Lines Technicians Work On
What a Kenmore Washer Technician Deals With
Top load models are built with either a Triple Action Agitator or an agitator-free impeller wash plate, which changes the parts and wash motion a technician works on. Source: Kenmore - Laundry Helper: Kenmore Washer Buying Guide
When to Call for Kenmore Washer Repair
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
- An error code on the display
How a Washer Service Call Usually Goes in Mapleton
Owner Care for Kenmore Washers
- Avoid packing in extra-large loads and follow the detergent maker's dosing for each load. Source: Kenmore - Tips for Washing Extra Large Loads of Laundry
- Smart models alert the owner when it is time to run the washer cleaning cycle. Source: Kenmore - 5 things you didn't know a Kenmore smart washer and dryer could do
Brand guides: Kenmore Washer Not Draining or Spinning: Fixes.
What Kenmore Washer Repairs Cost
A Kenmore washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Kenmore Washer Call
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Mapleton
Most washer calls in Mapleton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Mapleton Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
Kenmore Washer Repair FAQs: Mapleton, UT
Why does my Kenmore washer show an error code?
What stops a washer from spinning?
Why does my front-load washer smell?
Should I repair or replace my Kenmore washer?
More Washing Machine Repair in Mapleton, UT
Kenmore Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Kenmore washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.