GE owners in Clinton usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Clinton, with those that mention GE first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with GE. Listed companies are independent technicians who repair GE washers and other brands.
Who Works on GE Washers Near Clinton
We found 40 appliance repair companies within 30 miles of Clinton. 2 of them are based in Clinton itself, and the rest are spread across Salt Lake City (15), Clearfield (3), and Ogden (3). The farthest listed company is about 29 miles out. The closest is United Appliance Service, about 0.1 miles away. 1 of them mentions GE in their listing or website. The 29 rated companies in range average 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 27 |
|---|---|
| Appliance repair companies in range (30 mi) | 42 |
| Distance to the three closest (mi) | 0.1, 0.3, 2.2 |
| With 4.5+ stars and at least 10 reviews | 14 |
| Mention GE | 1 |
| Mention washer work | 2 |
At the top of the Clinton list: General Electric Appliance (28.1 miles away, based in Salt Lake City, 2.8 stars from 4 reviews, lists Saturday hours); iFiX, LLC (3.3 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (13.3 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Famous Appliance Service (20.8 miles away, based in North Salt Lake, 4.7 stars from 510 reviews).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
What Makes GE Washer Repairs Different
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
GE Washer Symptoms and First Checks
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
- Washer smells. Leave the lid up between uses so the inside can dry, since closing it too soon can cause a mildew odor. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
When to Call for GE Washer Repair
- Water left in the drum after the cycle
- Burning smell or a motor that hums without turning
- An error code on the display
How a Washer Service Call Usually Goes in Clinton
Owner Care for GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
Budgeting for a GE Washer Repair
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
Around Clinton
Most washer calls in Clinton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Clinton Washer Technician
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
GE Washer Repair FAQs: Clinton, UT
Why does my GE washer show an error code?
Do you work for GE?
Why won't my washer spin?
Is my GE washer worth repairing?
Related Repair Pages for Clinton
GE Washer Repair in Nearby Cities
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Clinton technician bring the right parts.