A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Kerrville, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
GE Washer Repair Near Kerrville
Within 60 miles of Kerrville there are 40 appliance repair companies in our data. 2 list an address in Kerrville, and other nearby bases include San Antonio (22), Boerne (6), and Fredericksburg (2). Distances run up to about 51 miles. No company within 90 miles of Kerrville mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Adair's Appliances, around 0.6 miles out. The 36 rated companies in range average 4.6 stars. Because the nearest shops are farther out, ask each company whether Kerrville is inside its regular service area.
Companies are shown by relevance and distance from Kerrville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Companies within 60 miles | 60 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 27 |
| Three nearest companies, miles away | 0.6, 2.2, 20.7 |
| Open on Saturdays (per listing) | 40 |
| Mention washer work | 17 |
| Mention GE | 0 |
First up for Kerrville: Next Service (20.7 miles away, based in Fredericksburg, 4.8 stars from 19 reviews, lists Saturday hours); Sears Appliance Repair (30.8 miles away, based in Boerne, 4.5 stars from 156 reviews, lists Saturday hours); Sears Appliance Repair (22.0 miles away, based in Fredericksburg, 4.7 stars from 222 reviews, lists Saturday hours); VoltFix Appliance Repair LLC (45.6 miles away, based in San Antonio, 5.0 stars from 325 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
GE Washer Symptoms and First Checks
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
GE Washer Error Codes
| Code | What it means |
|---|---|
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
What a Washing Machine Technician Checks
Care GE Recommends for Its Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a GE Washer Call
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Kerrville
Most washer calls in Kerrville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
How to Choose a Washing Machine Technician Near Kerrville
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
- What guarantee do you give on parts and labor?
GE Washer Repair FAQs: Kerrville, TX
Why is my washer leaking?
Why does my GE washer show an error code?
Is this GE customer service?
Why does my front-load washer smell?
More Washing Machine Repair in Kerrville, TX
More GE Washer Repair Pages Nearby
Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Kerrville technician bring the right parts.