GE owners in Boerne usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Boerne, with those that mention GE first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Boerne TX
We found 40 appliance repair companies within 30 miles of Boerne. 6 list an address in Boerne, and other nearby bases include San Antonio (29), Bandera (2), and Pipe Creek (1). Distances run up to about 24 miles. No company within 90 miles of Boerne mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Ready Appliance Repair is the nearest, roughly 0.6 miles from Boerne. Across 37 rated companies, the average public rating is 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 25 |
|---|---|
| Companies within 30 miles | 59 |
| Open on Saturdays (per listing) | 41 |
| Mention GE | 0 |
| Mention washer work | 15 |
| Distance to the three closest (mi) | 0.6, 0.6, 0.6 |
First up for Boerne: Sears Appliance Repair (1.0 miles away, 4.5 stars from 156 reviews, lists Saturday hours); VoltFix Appliance Repair LLC (16.4 miles away, based in San Antonio, 5.0 stars from 325 reviews, lists Saturday hours); UltraFix Appliance Repair (19.4 miles away, based in San Antonio, 4.8 stars from 443 reviews, lists Saturday hours); Coast Appliance Repair & AC (21.1 miles away, based in San Antonio, 4.9 stars from 886 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What a GE Washer Technician Deals With
Too much or non-HE detergent can cause oversudsing that slows the final spin and triggers a suds lock. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Says to Check First
- Washer not spinning. Allow for pauses between cycle steps, confirm power and that the lid is fully closed, and redistribute the load if the Spin light flashes or the display reads balancing. Source: GE Appliances - Top Load Washer - Does Not Spin
- Washer off balance or shaking. Remove some items from an overfilled basket or spread bunched items evenly, then make sure the washer is level. Source: GE Appliances - Frequently Asked Questions About GE Washers
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
Inside a Washer Repair Visit
Keeping a GE Washer Running
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Boerne
Most washer calls in Boerne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Boerne
- If the washer is leaking, will you find where the water starts before quoting a part?
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Boerne, TX
Do you work for GE?
Is my GE washer worth repairing?
What stops a washer from spinning?
Which Boerne technicians work on GE?
Related Repair Pages for Boerne
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.