A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Bulverde, with those that mention GE first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
GE Washer Repair Near Bulverde
We found 40 appliance repair companies within 30 miles of Bulverde. 1 list an address in Bulverde, and other nearby bases include San Antonio (21), Boerne (5), and New Braunfels (4). No company within 90 miles of Bulverde mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Bulverde Appliance Repair is the nearest, roughly 1.6 miles from Bulverde. Rated companies nearby average 4.6 stars across 34 businesses.
Companies are shown by relevance and distance from Bulverde. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention GE | 0 |
|---|---|
| Listing Saturday hours | 40 |
| Companies within 30 miles | 60 |
| Mention washer work | 14 |
| Distance to the three closest (mi) | 1.6, 4.1, 8.8 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
Closest matches for Bulverde: Matt's Appliance Care (9.4 miles away, based in San Antonio, 5.0 stars from 200 reviews, lists Saturday hours); VoltFix Appliance Repair LLC (15.9 miles away, based in San Antonio, 5.0 stars from 325 reviews, lists Saturday hours); UltraFix Appliance Repair (14.9 miles away, based in San Antonio, 4.8 stars from 443 reviews, lists Saturday hours); Mr. Appliance of San Antonio (16.2 miles away, based in San Antonio, 4.6 stars from 796 reviews, lists Saturday hours).
Know which GE washer you have before you call. GE makes top-load agitator, top-load impeller, front-load, and all-in-one combo models, and the technician will ask.
Know Your GE Washer
What a GE Washer Technician Deals With
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Washer not filling. Check the breaker and plug, make sure both water faucets are fully open, and look for clogged inlet hose screens. Source: GE Appliances - Top Load Washer - No Fill
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
GE Washer Problems Worth a Service Call
- Musty or mildew smell from the drum or door seal
- An error code on the display
- Loud banging, shaking or walking during the spin
What a Washing Machine Technician Checks
Owner Care for GE Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Price the repair before replacing a GE washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
What Bulverde Owners Should Know
Most washer calls in Bulverde come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Bulverde Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Bulverde, TX
How do I find a technician who knows GE washers?
Do you work for GE?
Why does my front-load washer smell?
Why is my washer leaking?
More Washing Machine Repair in Bulverde, TX
GE Washer Repair Near Bulverde
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.