A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Durant list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Independent GE Washer Technicians, Durant OK
36 repair companies serve Durant from within 60 miles. 3 of them are based in Durant itself, and the rest are spread across McKinney (13), Ardmore (4), and Sherman (3). No company within 90 miles of Durant mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 0.7 miles out. Rated companies nearby average 4.4 stars across 33 businesses. Because the nearest shops are farther out, ask each company whether Durant is inside its regular service area.
Companies are shown by relevance and distance from Durant. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Three nearest companies, miles away | 0.7, 1.0, 1.0 |
|---|---|
| Appliance repair companies in range (60 mi) | 36 |
| Name washers or washing machines in their listing | 9 |
| Mention GE | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 22 |
| Open on Saturdays (per listing) | 28 |
At the top of the Durant list: Sears Appliance Repair (0.7 miles away, 4.8 stars from 83 reviews, lists Saturday hours); Sears Appliance Repair (24.0 miles away, based in Sherman, 4.5 stars from 296 reviews, lists Saturday hours); Sears Appliance Repair (45.3 miles away, based in Antlers, 4.7 stars from 66 reviews, lists Saturday hours); Texas True Appliance Repair (57.8 miles away, based in McKinney, 4.9 stars from 430 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your GE Washer
How GE Washers Are Built
The drain hose should use the included anti-siphon clip and must not be pushed too deep into the standpipe or taped in place, which can siphon water out of the washer. Source: GE Appliances - Front Load Washer - Troubleshooting
Electronic models sense load size and type before and during fill, and they detect an out-of-balance load and try to redistribute it, which can keep the spin from reaching full speed. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
What GE Says to Check First
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
Reading a GE Washer Error Code
| Code | What it means |
|---|---|
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
When to Call for GE Washer Repair
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
- An error code on the display
How a Washer Service Call Usually Goes in Durant
Owner Care for GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Durant
Most washer calls in Durant come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Hiring a Washer Repair Company in Durant
- What guarantee do you give on parts and labor?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If a part has to be ordered, how soon can you come back to finish?
GE Washer Repair FAQs: Durant, OK
Is my GE washer worth repairing?
What stops a washer from spinning?
Why does my front-load washer smell?
More Washing Machine Repair in Durant, OK
GE Washer Repair Near Durant
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.