A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Bonham list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Independent GE Washer Technicians, Bonham TX
Our data shows 40 appliance repair companies inside a 60-mile radius of Bonham. The rest are spread across McKinney (17), Sherman (3), and Durant (3). Distances run up to about 45 miles. No company within 90 miles of Bonham mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Osbourn Air & Appliance Repair, about 23.6 miles away. Across 35 rated companies, the average public rating is 4.5 stars. Because the nearest shops are farther out, ask each company whether Bonham is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 23.6, 23.8, 24.4 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 31 |
| Repair companies inside 60 miles | 60 |
| Open on Saturdays (per listing) | 44 |
| Mention GE | 0 |
| Mention washer work | 13 |
Closest matches for Bonham: Smartway Appliance Repair (41.5 miles away, based in McKinney, 4.9 stars from 1,145 reviews, lists Saturday hours); Texas True Appliance Repair (37.3 miles away, based in McKinney, 4.9 stars from 430 reviews, lists Saturday hours); Sears Appliance Repair (23.8 miles away, based in Sherman, 4.5 stars from 296 reviews, lists Saturday hours); ThumbUp Pro Appliance Repair (42.9 miles away, based in McKinney, 4.9 stars from 247 reviews, lists Saturday hours).
GE Washer Lines Technicians Work On
What a GE Washer Technician Deals With
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
Common GE Washer Problems
- Front load washer not draining. Check the drain hose for kinks and correct standpipe placement, clean the pump filter at the bottom front, and rebalance the load. Source: GE Appliances - Front Load Washer - Troubleshooting
- Lid won't unlock. Wait for the basket to coast to a complete stop after spinning, since the lid stays locked until it does. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Error Codes
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| UE | The load is unbalanced; spread the laundry evenly and make sure the washer is level. Source: GE Appliances - Washer - Consumer Help Indicator |
Signs Your GE Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Bonham Washer Call
Keeping a GE Washer Running
- Clean the detergent dispenser trays and housing at least once a month to clear product buildup. Source: GE Appliances - Front Load Washer - Leaking Water
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Any error code shown on the display
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Bonham
Most washer calls in Bonham come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Bonham Washer Technician
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
GE Washer Repair FAQs: Bonham, TX
What should I do about a GE error code?
Is this GE customer service?
What stops a washer from spinning?
Other Washer Repair in Bonham
GE Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.