Serving Marquette, Michigan and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

GE Washer Repair in Marquette, MI

See which technicians around Marquette, MI mention GE, how far away they are and how customers rate them.

GE washer acting up in Marquette?
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓6 companies listed for Marquette✓Independent, not a manufacturer✓Public ratings & distances

A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.

GE Washer Repair Near Marquette

Within 66 miles of Marquette there are 6 appliance repair companies in our data. 1 list an address in Marquette, and other nearby bases include Dollar Bay (2), Skandia (1), and Escanaba (1). The closest is Sears Appliance Repair, about 0.8 miles away. 1 lists GE specifically. The 5 rated companies in range average 3.7 stars. Because the nearest shops are farther out, ask each company whether Marquette is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1495 Odovero Dr, Marquette, MI 49855
0.8 mi from Marquette
★★★★½ 4.4 (46 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
801 N Lincoln Rd, Escanaba, MI 49829
56.7 mi from Marquette
★★★★½ 4.7 (14 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
610 S Carpenter Ave, Kingsford, MI 49802
60.4 mi from Marquette
★★★★½ 4.3 (25 reviews)
Mentions washersSaturday hours
Appliance Repair
J&H Enterprises of Marquette llc
342 Co Rd TA, Skandia, MI 49885
12.5 mi from Marquette
★ 1.0 (3 reviews)
Appliance Repair
Ozanich Tom & Renee
23571 Cedar Ave, Dollar Bay, MI 49922
65.3 mi from Marquette
Appliance Repair
Keweenaw Kitchens.
23571 Cedar Ave, Dollar Bay, MI 49922
65.3 mi from Marquette
★★★★ 4.0 (4 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Washer repair near Marquette at a glance
Mention washer work3
Companies within 66 miles6
Rated 4.5 stars or higher (10+ reviews)1
Mention GE1
Open on Saturdays (per listing)3
Three nearest companies, miles away0.8, 12.5, 56.7

The leading options for Marquette are Sears Appliance Repair (0.8 miles away, 4.4 stars from 46 reviews, lists Saturday hours); Sears Appliance Repair (56.7 miles away, based in Escanaba, 4.7 stars from 14 reviews, lists Saturday hours); Sears Appliance Repair (60.4 miles away, based in Kingsford, 4.3 stars from 25 reviews, lists Saturday hours); J&H Enterprises of Marquette llc (12.5 miles away, based in Skandia, 1.0 stars from 3 reviews).

⚡ Call to reach an independent GE washer tech
☎(866) 293-4411

GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

GE Washer Lines and Features

GE Profile UltraFast ComboAn all-in-one ventless washer and dryer that moves a load from washing to drying in the same drum on a standard 120V outlet.
SmartDispenseA bulk detergent reservoir that holds many loads of detergent and doses it automatically by load size.

What Makes GE Washer Repairs Different

On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights

GE Washer Symptoms and First Checks

What GE Washer Codes Mean

CodeWhat it means
FEWater has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator
dE / E2The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator
H2O SUPPLY / IEWater is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator

When to Call for GE Washer Repair

  • Grinding or roaring noise that rises with spin speed
  • Loud banging, shaking or walking during the spin
  • An error code on the display

What Gets Fixed on a Marquette Washer Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Keeping a GE Washer Running

Brand guides: GE Washer Not Draining or Spinning: What to Check.

Budgeting for a GE Washer Repair

Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Getting Ready for the Repair

  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • Any error code shown on the display

Around Marquette

Most washer calls in Marquette come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

Before You Book in Marquette

  • Will you check the drain pump filter and drain hose before replacing the pump?
  • Can you give a written estimate before ordering parts?
  • Is your company licensed where my state requires it, and insured?

GE Washer Repair FAQs: Marquette, MI

Which Marquette technicians work on GE?
Companies whose listings or websites mention GE are flagged on this page. Most washer technicians work on several brands, so ask how often they service your model line and whether they can get GE parts quickly.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

More Washing Machine Repair in Marquette, MI

GE Washer Repair Near Marquette

Write down any error code your GE washer shows and at what point in the cycle it appears. It helps a Marquette technician bring the right parts.

Get connected with a GE washer technician near Marquette
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech