A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Ann Arbor list starts with companies that name GE, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Washers Near Ann Arbor
Our data shows 40 appliance repair companies inside a 30-mile radius of Ann Arbor. 5 of them are based in Ann Arbor itself, and other nearby bases include Livonia (11), Romulus (3), and Dearborn Heights (3). No company within 90 miles of Ann Arbor mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Anytime Ann Arbor Appliance Repair, about 0.6 miles away. Rated companies nearby average 4.3 stars across 38 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Distance to the three closest (mi) | 0.6, 1.0, 2.6 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Companies within 30 miles | 60 |
| Name washers or washing machines in their listing | 13 |
| Listing Saturday hours | 38 |
The leading options for Ann Arbor are Sears Appliance Repair (2.6 miles away, 4.5 stars from 287 reviews, lists Saturday hours); Michigan Appliance Repair (24.9 miles away, based in Hartland, 4.8 stars from 863 reviews, lists Saturday hours); Mr. Appliance of Oakland County (19.8 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Michigan Appliance Repair (4.5 miles away, 4.7 stars from 2,578 reviews, lists Saturday hours).
GE Washer Lines and Features
What a GE Washer Technician Deals With
Most front load models have a drain pump filter reachable at the bottom front of the cabinet, while models without front access need a technician to reach it. Source: GE Appliances - Front Load Washer - Troubleshooting
What GE Says to Check First
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
GE Washer Error Codes
| Code | What it means |
|---|---|
| FE | Water has reached a critical level; shut off water and power and call for service. Source: GE Appliances - Washer - Consumer Help Indicator |
| H2O SUPPLY / IE | Water is not reaching the washer; check the house supply and that both valves are open. Source: GE Appliances - Washer - Consumer Help Indicator |
| Po (or flashing Rinse light) | The washer is draining slowly, usually from a clog or a pinched drain hose. Source: GE Appliances - Top Load Washer - Will Not Drain |
When to Call for GE Washer Repair
- Burning smell or a motor that hums without turning
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Ann Arbor Washer Call
Care GE Recommends for Its Washers
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
- To clean a top load tub, fill it with hot water at the highest level, add a cup of chlorine bleach, and run a regular wash cycle. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
GE Washer Repair Cost Ranges
Most GE washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Ann Arbor, MI
City of Ann Arbor Water Treatment Services, which supplies Ann Arbor, reports hardness of hard; total hardness averaged about 130 mg/L (about 7.6 grains per gallon), ranging roughly 96-170 mg/L, in the city's 2019 water quality report. Hard water leaves scale on washer inlet screens and heating parts and calls for the right detergent dose, which is worth mentioning when you book a repair. Source: 2019 Water Quality Report - City of Ann Arbor
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Ann Arbor Washer Technician
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Washer Repair FAQs: Ann Arbor, MI
Why does my front-load washer smell?
Why is my washer leaking?
Why won't my washer spin?
Do you work for GE?
Related Repair Pages for Ann Arbor
GE Washer Repair Near Ann Arbor
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a GE repair.