A GE washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Sturgeon Bay list starts with companies that name GE, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by GE. If your washer is still under manufacturer coverage, contact GE directly.
Who Works on GE Washers Near Sturgeon Bay
Within 60 miles of Sturgeon Bay there are 21 appliance repair companies in our data. The rest are spread across Green Bay (11), De Pere (3), and Menominee (1). Sears Appliance Repair is the nearest, roughly 23.1 miles from Sturgeon Bay. No company within 90 miles of Sturgeon Bay mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 20 rated companies in range average 4.6 stars. Sturgeon Bay is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Rated 4.5 stars or higher (10+ reviews) | 5 |
|---|---|
| Mention washer work | 4 |
| Listing Saturday hours | 9 |
| Mention GE | 0 |
| Three nearest companies, miles away | 23.1, 23.1, 32.5 |
| Companies within 60 miles | 21 |
Closest matches for Sturgeon Bay: Mr. Appliance of Green Bay (43.4 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Sears Appliance Repair (23.1 miles away, based in Menominee, 4.4 stars from 14 reviews, lists Saturday hours); Mr. Appliance of Appleton (54.7 miles away, based in Kaukauna, 4.9 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (40.2 miles away, based in Green Bay, 3.9 stars from 38 reviews, lists Saturday hours).
GE sells top-load agitator, top-load impeller, front-load, and all-in-one combo washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
GE Washer Lines and Features
What Makes GE Washer Repairs Different
On electronic top load models the lid locks automatically during parts of the cycle and stays locked until the basket has coasted to a full stop. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights
GE Washer Symptoms and First Checks
- Washer leaking. Clean the underside and folds of the door gasket, make sure the detergent drawer is closed and not clogged, use less HE detergent, and inspect the fill and drain hoses. Source: GE Appliances - Front Load Washer - Leaking Water
- Washer not draining. Wait out normal pauses between cycle steps, then look for a kinked or clogged drain hose, a drain set too high, or a clog shown by a Po code or flashing Rinse light. Source: GE Appliances - Top Load Washer - Will Not Drain
What GE Washer Codes Mean
| Code | What it means |
|---|---|
| dE / E2 | The lid was opened during the cycle; close it and press Start to resume. Source: GE Appliances - Washer - Consumer Help Indicator |
| CAnCELEd | The cycle was paused for more than a day or was stopped by certain errors. Source: GE Appliances - Washer - Consumer Help Indicator |
| LId | The cycle stopped because the lid is open, or the lid was not opened between several cycles. Source: GE Appliances - Top Load Washer - Display and Status / Feature Lights |
Signs Your GE Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
- An error code on the display
What Gets Fixed on a Sturgeon Bay Washer Call
Care GE Recommends for Its Washers
- Wipe the front load door gasket, including its folds and edge, after each wash to remove soil and soap residue. Source: GE Appliances - Front Load Washer - Leaking Water
- Leave a top load lid up when the washer is not in use so the inside can dry out. Source: GE Appliances - Frequently Asked Questions About GE Washers
Brand guides: GE Washer Not Draining or Spinning: What to Check.
What GE Washer Repairs Cost
A GE washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Any error code shown on the display
- How old the washer is
- Where the washer drains (standpipe or laundry sink)
What Sturgeon Bay Owners Should Know
Most washer calls in Sturgeon Bay come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Before You Book in Sturgeon Bay
- If the washer is leaking, will you find where the water starts before quoting a part?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
GE Washer Repair FAQs: Sturgeon Bay, WI
What should I do about a GE error code?
Why does my front-load washer smell?
Is this GE customer service?
Should I repair or replace my GE washer?
Related Repair Pages for Sturgeon Bay
GE Washer Repair Near Sturgeon Bay
Before you call, find the model and serial number on your GE washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.