If your Frigidaire washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Midwest City list starts with companies that name Frigidaire, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Frigidaire, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Frigidaire Washers Near Midwest City
Our data shows 30 appliance repair companies inside a 30-mile radius of Midwest City. 2 of them are based in Midwest City itself, and other nearby bases include Oklahoma City (12), Norman (4), and Edmond (3). The farthest listed company is about 27 miles out. None of the repair companies near Midwest City name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Sears Appliance Repair, around 2.2 miles out. Rated companies nearby average 4.3 stars across 27 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Frigidaire | 0 |
|---|---|
| Three nearest companies, miles away | 2.2, 2.4, 2.8 |
| Repair companies inside 30 miles | 30 |
| Name washers or washing machines in their listing | 11 |
| Open on Saturdays (per listing) | 17 |
| With 4.5+ stars and at least 10 reviews | 13 |
At the top of the Midwest City list: Adam's Appliance Repair, Inc (15.6 miles away, based in Oklahoma City, 4.9 stars from 1,147 reviews, lists Saturday hours); Mr. Appliance of Oklahoma City (10.2 miles away, based in Oklahoma City, 4.7 stars from 1,102 reviews, lists Saturday hours); All Pro Appliance Repair Service Oklahoma City (9.7 miles away, based in Oklahoma City, 4.9 stars from 617 reviews); All Pro Appliance Repair Service (15.8 miles away, based in Edmond, 4.9 stars from 1,254 reviews).
Frigidaire Washer Lines Technicians Work On
What a Frigidaire Washer Technician Deals With
Top-load models lock the lid during spin as a safety feature, and the lock takes roughly one to three minutes to release after the washer is stopped. Source: Frigidaire - Top Load washer lid will not open
What Frigidaire Says to Check First
- Washer not spinning. Start with an unbalanced load: power off, wait for the lid to unlock, rearrange the clothes or add a few similar items, then restart. Source: Frigidaire - Top loading washer tub not spinning
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, and cut back on excess detergent. Source: Frigidaire - What should I do if my washer is draining slowly?
Frigidaire Washer Error Codes
| Code | What it means |
|---|---|
| E2 | Water is taking too long to drain or not draining properly (top load). Source: Frigidaire - Top loading washer Error Code E2 water takes too long to drain |
| E4 | The washer is out of balance during spin (top load). Source: Frigidaire - Top loading washer Error Code E4 washer is out of balance |
Frigidaire Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
Inside a Washer Repair Visit
Keeping a Frigidaire Washer Running
- Use the recommended detergent amount and keep dispenser compartments below the max line, since excess detergent slows draining. Source: Frigidaire - What should I do if my washer is draining slowly?
- Level the washer front to back and side to side on a solid floor, then tighten the leveling-leg lock nuts; legs should not extend more than half an inch below the base. Source: Frigidaire - Laundry Washers Noises Guide
Frigidaire Washer Repair Cost Ranges
A Frigidaire washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Frigidaire Washer Call
- How old the washer is
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Midwest City
Most washer calls in Midwest City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)
In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.
Hiring a Washer Repair Company in Midwest City
- If a part has to be ordered, how soon can you come back to finish?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Frigidaire Washer Repair FAQs: Midwest City, OK
What stops a washer from spinning?
Where is the water under my washer coming from?
What should I do about a Frigidaire error code?
Which Midwest City technicians work on Frigidaire?
More Washing Machine Repair in Midwest City, OK
More Frigidaire Washer Repair Pages Nearby
Before you call, find the model and serial number on your Frigidaire washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.